Saturday the 19th i started working on my car, I added 440cc injectors, fuel return, 3.12 pulley & Utec. Before w/ the SS box I had 60 psi oil pressure, now after installing everything and starting it up today my oil pressure was at 40 psi. Didnt let the car warm up, it was just a test start, but oil pressure has never been that low at cold idle. Any reasons this could be happening?

 

Any smoke? Did you check for leaks?

 

There was no smoke from what I can see & There might be a small leak that I am going to look at monday. But nothing real different from before. Thats why im not to sure what would cause it.

 

Even a small leak can drop pressure like this. Hey you are in SA hhmm.. your one of andrews boys?

 

A small leak can cause a 20 psi drop? If so then i think im going to have to drop the oil pan and reseal it. Cause thats where I think its coming from.

Yup im in SA, yeah me and drew just got our cars started today. will be taking them to houston this wednesday to get tuned.

 

Let me take a look at it. It might be nothing.

 

Just let me know when you can take a look at it, just need to get andrews car off the lift and put mine on.

 

I want to take a look at it before you go to Htown I would not like if you broke down on the freeway, It is some drive. You said andrews car is on the lift now? Maybe I should look at his fuel problem first. Like you said before it might not have been installed right or he might just be running on a really rich map for his setup.

 

sounds good, Ill let you know when we will be up at the shop, ill pm you my
number.

 

Cool.