Blow of valve questions
Originally Posted by zcon
http://www.youtube.com/watch?v=pm741K8AQbs
and
http://www.youtube.com/watch?v=QBvF7cufIa0
sound like they are crying a buddy of mine had a blue 350 greddy TT @5.5 psi and is sounded like the car was crying was so hot!!!
and
http://www.youtube.com/watch?v=QBvF7cufIa0
sound like they are crying a buddy of mine had a blue 350 greddy TT @5.5 psi and is sounded like the car was crying was so hot!!!
Originally Posted by dank311
I thought that orange ZR had the greddy RS??? can anyone confirm? Whos car is this...its obviously at Forged.
maybe I'm wrong, but I thought that it is owned by someone named Sherman.
Great thread! Just thought I'd add to it a little bit.
In my opinion, the Tial on Jeffie's Powerlab kit still sounds the best out of all the Tial BOV sounds. There's something about that "pfftit" sound effect!!!
(shown below)
http://www.youtube.com/watch?v=n5W0-c_BAtc&fmt=18
Funny thing is, outside of the Powerlab videos, every single Tial BOV video clip sounds completely different.
The HKS sounds pretty consistant across the board with the chirp/squeak + air release sound in most of the Z/G videos posted online. Here's one for reference
http://www.youtube.com/watch?v=Ss20HHM4grc&&fmt=18
I didn't know what the Greddy RS sounded like until I found this thread! It sounds pretty cool and doesn't seem too loud.
What do you guys think of the APS BOV? Here's a clip I found recently
http://www.youtube.com/watch?v=6pZ45xQj0g4&fmt=18
It kinda sounds like a little surge going on though but i'm thinking it may just be normal? Does anyones APS BOV vent without the surging sound?
In my opinion, the Tial on Jeffie's Powerlab kit still sounds the best out of all the Tial BOV sounds. There's something about that "pfftit" sound effect!!!
(shown below)
http://www.youtube.com/watch?v=n5W0-c_BAtc&fmt=18
Funny thing is, outside of the Powerlab videos, every single Tial BOV video clip sounds completely different.
The HKS sounds pretty consistant across the board with the chirp/squeak + air release sound in most of the Z/G videos posted online. Here's one for reference
http://www.youtube.com/watch?v=Ss20HHM4grc&&fmt=18
I didn't know what the Greddy RS sounded like until I found this thread! It sounds pretty cool and doesn't seem too loud.
What do you guys think of the APS BOV? Here's a clip I found recently
http://www.youtube.com/watch?v=6pZ45xQj0g4&fmt=18
It kinda sounds like a little surge going on though but i'm thinking it may just be normal? Does anyones APS BOV vent without the surging sound?
Last edited by tiguy99; Mar 18, 2010 at 10:21 PM.
Does anyone know if this guy's running one or two HKS SSQ BOVs? The venting sound is much louder than the HKS clip above ^ ^
http://www.youtube.com/watch?v=uTTjqAoJ76k&fmt=18
http://www.youtube.com/watch?v=uTTjqAoJ76k&fmt=18
Great thread! Just thought I'd add to it a little bit.
In my opinion, the Tial on Jeffie's Powerlab kit still sounds the best out of all the Tial BOV sounds. There's something about that "pfftit" sound effect!!!
(shown below)
http://www.youtube.com/watch?v=n5W0-c_BAtc&fmt=18
Funny thing is, outside of the Powerlab videos, every single Tial BOV video clip sounds completely different.
In my opinion, the Tial on Jeffie's Powerlab kit still sounds the best out of all the Tial BOV sounds. There's something about that "pfftit" sound effect!!!
(shown below)
http://www.youtube.com/watch?v=n5W0-c_BAtc&fmt=18
Funny thing is, outside of the Powerlab videos, every single Tial BOV video clip sounds completely different.
okay! Standing patient. I'm debating which BOV I should pick up next week.
It'll be for the Greddy TT kit running under 9psi.
I really like the sound of the Tial in Jeffie's video ^ ^
It'll be for the Greddy TT kit running under 9psi. I really like the sound of the Tial in Jeffie's video ^ ^
Last edited by tiguy99; Mar 19, 2010 at 02:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post



