Official STS Rear Mount Turbo Discussion Thread
#1501
Imakecopies
iTrader: (13)
Join Date: May 2004
Location: Charleston, SC
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
Since my town doesn't require emissions, to play it safe I'll just go with test pipes. I would love to get the XYZ pipe, but it's quite pricey.
What do you guys recommend again for test pipes? I need something cheap. I'd like to get ones that have two extra bungs welded in though so I don't have to head to the exhaust shop. I think maybe the only ones that have that are the Berks, although they don't have the support tabs on them.
What do you guys recommend again for test pipes? I need something cheap. I'd like to get ones that have two extra bungs welded in though so I don't have to head to the exhaust shop. I think maybe the only ones that have that are the Berks, although they don't have the support tabs on them.
#1504
Banned
Thread Starter
iTrader: (27)
Join Date: Sep 2006
Location: Concord, North Carolina
Posts: 3,485
Likes: 0
Received 0 Likes
on
0 Posts
^ true the 2.25 inch test pipes will take away slightly from your top end but they cut down on surface area for heat loss and also increase exhaust gas velocity which gets the turbo spooling a little faster.
#1505
Registered User
iTrader: (2)
Join Date: Nov 2005
Location: NYC
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
I just got back from the track and did get 7 runs!!!! That's right 7 runs in 3 hours (6pm-9pm) lol .. The good news I'm trapping 111mph consistently (best was 111.69mph), bad news I cant hook for ****!!! Street tires and FI FTL!!!! This was done with my heavy Work VSXX 19's and my best 60' was 2.336 (but mis-shifted on 2nd). My 60' was consistently around 2.4-2.5. This was my second time at the track. My first time was bad coz I shifted at 6000rpm on every gear This time I shifted around 6500-6700rpm..
Here's my best..
60 - 2.421
330 - 6.078
1/8 - 8.960
1/8 trap - 87.15mph
1000 - 11.40
1/4 - 13.43
1/4 mph - 111.69
I was spinning and hopping like crazy. Also I was knocking again like crazy! I dont know why I knock like crazy when at the track but not on the street. I do a lot of drag on the street and even when tuning but never knock like this. Utec is pulling timing left and right so I had to do 5 adjustment on my tune at the track. A/F is around 11.3-11.5 on full boost so I had to remove some timing just to eliminate some of the knock...ggrrr also had shift knock so I had to tune the Timing 0 column above 5000rpm to eliminate the shift knock. oh, well I need DR/Slick and lighter wheel!!!
Here's my best..
60 - 2.421
330 - 6.078
1/8 - 8.960
1/8 trap - 87.15mph
1000 - 11.40
1/4 - 13.43
1/4 mph - 111.69
I was spinning and hopping like crazy. Also I was knocking again like crazy! I dont know why I knock like crazy when at the track but not on the street. I do a lot of drag on the street and even when tuning but never knock like this. Utec is pulling timing left and right so I had to do 5 adjustment on my tune at the track. A/F is around 11.3-11.5 on full boost so I had to remove some timing just to eliminate some of the knock...ggrrr also had shift knock so I had to tune the Timing 0 column above 5000rpm to eliminate the shift knock. oh, well I need DR/Slick and lighter wheel!!!
Last edited by athenG; 10-22-2008 at 06:43 PM.
#1506
Registered User
iTrader: (19)
I just got back from the track and did get 7 runs!!!! That's right 7 runs in 3 hours (6pm-9pm) lol .. The good news I'm trapping 111mph consistently (best was 111.69mph), bad news I cant hook for ****!!! Street tires and FI FTL!!!! This was done with my heavy Work VSXX 19's and my best 60' was 2.336 (but mis-shifted on 2nd). My 60' was consistently around 2.4-2.5. This was my second time at the track. My first time was bad coz I shifted at 6000rpm on every gear This time I shifted around 6500-6700rpm..
Here's my best..
60 - 2.421
330 - 6.078
1/8 - 8.960
1/8 trap - 87.15mph
1000 - 11.40
1/4 - 13.43
1/4 mph - 111.69
I was spinning and hopping like crazy. Also I was knocking again like crazy! I dont know why I knock like crazy when at the track but not on the street. I do a lot of drag on the street and even when tuning but never knock like this. Utec is pulling timing left and right so I had to do 5 adjustment on my tune at the track. A/F is around 11.3-11.5 on full boost so I had to remove some timing just to eliminate some of the knock...ggrrr also had shift knock so I had to tune the Timing 0 column above 5000rpm to eliminate the shift knock. oh, well I need DR/Slick and lighter wheel!!!
Here's my best..
60 - 2.421
330 - 6.078
1/8 - 8.960
1/8 trap - 87.15mph
1000 - 11.40
1/4 - 13.43
1/4 mph - 111.69
I was spinning and hopping like crazy. Also I was knocking again like crazy! I dont know why I knock like crazy when at the track but not on the street. I do a lot of drag on the street and even when tuning but never knock like this. Utec is pulling timing left and right so I had to do 5 adjustment on my tune at the track. A/F is around 11.3-11.5 on full boost so I had to remove some timing just to eliminate some of the knock...ggrrr also had shift knock so I had to tune the Timing 0 column above 5000rpm to eliminate the shift knock. oh, well I need DR/Slick and lighter wheel!!!
As for the knock - that sucks. Your IAT's running really high? I had the same shift-knock issue with my Vortech - I believe I had to add fuel and pull timing above 4500 in the 0 column to completely get rid of it.
#1507
Registered User
iTrader: (2)
Join Date: Nov 2005
Location: NYC
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
Well that's good that things were mostly running good. I don't know jack about 60' times so I won't try to comment on that.
As for the knock - that sucks. Your IAT's running really high? I had the same shift-knock issue with my Vortech - I believe I had to add fuel and pull timing above 4500 in the 0 column to completely get rid of it.
As for the knock - that sucks. Your IAT's running really high? I had the same shift-knock issue with my Vortech - I believe I had to add fuel and pull timing above 4500 in the 0 column to completely get rid of it.
#1508
Registered User
Join Date: Nov 2007
Location: California
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
BUT...I need to run cats. My set up is 7-8 lbs of boost on MBC with an APS tall boy plenum (stuff affecting flow).
#1509
Registered User
iTrader: (8)
Join Date: Oct 2005
Location: New York City
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
Why don't you try the Motrodyne XYZ pipe with HFC option? A single larger HFC located further downstream may have less chances blowing up than two smaller CATS in the OEM positions.
#1510
New Member
iTrader: (11)
111 mph traps should be mid 12's. so get the spinning and 60ft down and you'l pick up almost 1s.
Here's my best..
60 - 2.421
330 - 6.078
1/8 - 8.960
1/8 trap - 87.15mph
1000 - 11.40
1/4 - 13.43
1/4 mph - 111.69
I was spinning and hopping like crazy. Also I was knocking again like crazy! I dont know why I knock like crazy when at the track but not on the street. I do a lot of drag on the street and even when tuning but never knock like this. Utec is pulling timing left and right so I had to do 5 adjustment on my tune at the track. A/F is around 11.3-11.5 on full boost so I had to remove some timing just to eliminate some of the knock...ggrrr also had shift knock so I had to tune the Timing 0 column above 5000rpm to eliminate the shift knock. oh, well I need DR/Slick and lighter wheel!!!
Here's my best..
60 - 2.421
330 - 6.078
1/8 - 8.960
1/8 trap - 87.15mph
1000 - 11.40
1/4 - 13.43
1/4 mph - 111.69
I was spinning and hopping like crazy. Also I was knocking again like crazy! I dont know why I knock like crazy when at the track but not on the street. I do a lot of drag on the street and even when tuning but never knock like this. Utec is pulling timing left and right so I had to do 5 adjustment on my tune at the track. A/F is around 11.3-11.5 on full boost so I had to remove some timing just to eliminate some of the knock...ggrrr also had shift knock so I had to tune the Timing 0 column above 5000rpm to eliminate the shift knock. oh, well I need DR/Slick and lighter wheel!!!
#1511
Registered User
iTrader: (2)
Join Date: Nov 2005
Location: NYC
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, and this was with my 19's.. I might go back again on 11/09 with the G35NYC crew and Glex might lend me his 18's with Nitto Invo. Not sure if that is going to grip on colder weather. The tack last night was just horrible.. There was a 350z there and consistently getting 2.6 60' Next Spring I will definitely get a smaller wheel (15-16 inch) and Slick...
#1512
Banned
Thread Starter
iTrader: (27)
Join Date: Sep 2006
Location: Concord, North Carolina
Posts: 3,485
Likes: 0
Received 0 Likes
on
0 Posts
well if you can take .25 seconds off your 60' which is entirely doable i think, you should take .5 seconds off of your ET which would put you in 12's. I'm thinking 12.7-12.8
#1513
Registered User
Join Date: Nov 2007
Location: California
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
#1516
Registered User
iTrader: (19)
^ Yes, I'm very interested as well.
Well, I am definitely getting some compressor surge when letting off when just rolling into boost. Letting off from WOT is fine, but other than that I definitely get a fluttering "squelch" sound from the rear. I have the -11 psi spring now, and in my logs I see it hitting -11+ psi when I'm off-throttle. However, I'll have to double check vacuum at idle tomorrow. I may just go with the -9 psi spring.
So all you guys hear is a "whoosh" or flutter from the BOV letting off under low boost? Nothing from the rear? I'm just wondering why I would be the only one having an issue.
Well, I am definitely getting some compressor surge when letting off when just rolling into boost. Letting off from WOT is fine, but other than that I definitely get a fluttering "squelch" sound from the rear. I have the -11 psi spring now, and in my logs I see it hitting -11+ psi when I'm off-throttle. However, I'll have to double check vacuum at idle tomorrow. I may just go with the -9 psi spring.
So all you guys hear is a "whoosh" or flutter from the BOV letting off under low boost? Nothing from the rear? I'm just wondering why I would be the only one having an issue.
#1518
Registered User
iTrader: (2)
Join Date: Nov 2005
Location: NYC
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
^ Yes, I'm very interested as well.
Well, I am definitely getting some compressor surge when letting off when just rolling into boost. Letting off from WOT is fine, but other than that I definitely get a fluttering "squelch" sound from the rear. I have the -11 psi spring now, and in my logs I see it hitting -11+ psi when I'm off-throttle. However, I'll have to double check vacuum at idle tomorrow. I may just go with the -9 psi spring.
So all you guys hear is a "whoosh" or flutter from the BOV letting off under low boost? Nothing from the rear? I'm just wondering why I would be the only one having an issue.
Well, I am definitely getting some compressor surge when letting off when just rolling into boost. Letting off from WOT is fine, but other than that I definitely get a fluttering "squelch" sound from the rear. I have the -11 psi spring now, and in my logs I see it hitting -11+ psi when I'm off-throttle. However, I'll have to double check vacuum at idle tomorrow. I may just go with the -9 psi spring.
So all you guys hear is a "whoosh" or flutter from the BOV letting off under low boost? Nothing from the rear? I'm just wondering why I would be the only one having an issue.
How can you get compressor surge at -11 or anything below 0psi? Are you sure it is a surge? On a low boost (1-3psi) all I hear is just a flutter. when driving the flutter sound like it is coming from the back though Even at cruising the turbo is going to whine and it is normal... I even get that whining sound even in vacuum which I kind alike coz I love the sound of the turbo... What I love the most is going up hill just cruising and I hear the turbo whined even on Vacuum!!! I really doubt you are hearing a compressor surge at vacuum.
#1520
Registered User
iTrader: (19)
How can you get compressor surge at -11 or anything below 0psi? Are you sure it is a surge? On a low boost (1-3psi) all I hear is just a flutter. when driving the flutter sound like it is coming from the back though Even at cruising the turbo is going to whine and it is normal... I even get that whining sound even in vacuum which I kind alike coz I love the sound of the turbo... What I love the most is going up hill just cruising and I hear the turbo whined even on Vacuum!!! I really doubt you are hearing a compressor surge at vacuum.
So what is that noise we hear? The WG? I don't see how it could be the wastegate, since it should be staying closed at all times below 3 psi or so. I just thought it sounded like air being forced back out the turbo air inlet, which is compressor surge.