Fi auto owners ? about trans coolers
I now which cooler i want but after reading about so many options(fan cooled versus non fan cooled)i was wondering where you mounted it.With the size of our intercoolers,were did you mount your,s.My front end looks like this so i think if i mounted it on the pass side front air duct i shouldnt need a fan right.Of course i dont have the stillen anymore,its now the greddy twins and no front tag.
I have the HiTek tranny cooler with the 7"fan. HiTek makes one with a bigger fan 9 1/2"... I mounted mine in the rear of the car between the exhaust.If you were to look right under the rear bumper, their it is....
Originally Posted by coachk
I have the HiTek tranny cooler with the 7"fan. HiTek makes one with a bigger fan 9 1/2"... I mounted mine in the rear of the car between the exhaust.If you were to look right under the rear bumper, their it is....
Originally Posted by superchargedg
What i was thinking is that if i put behind the pass side opening it should get plenty of airflow and not need a fan.I realize that the twins do get very hot but i still dont think a fan would be required with the air flow i would get with this type of opening.
Originally Posted by booger
I have mine in the passanger side air hole on my aftermarket bumper...no fan needed
Trending Topics
Originally Posted by superchargedg
Thank you booger,that is what i was thinking also....i just wanted to make sure.I think we are alike old farts that want to hand it to the young ones every now and then.
I guess you could put it in the front air duct and go without a fan but I wanted mine hidden. Its just so hot here in Florida I figured a fan would be a necessity.My fan kicks on just about everytime I take it out for a ride.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM




