Looking for a shop for a custom build/built motor
Oh no, this already sounds like the FI equivalent of this thread, building a na monster. How did you happen to have a few GT35s laying around? What about a 350Z? You know you'll need one of those too, right? Is the goal 1200+hp or 9s? Just curious, have you ever driven anything with over 100whp? What is your budget?
ship your car to us, we are all about drag racing and can build you whatever you want. we have some of the fastest times recorded on the stock 6 speed on the boards. we are going to hopefully improve those a lot here soon.
pm me for more details....
pm me for more details....
Originally Posted by undrgnd
Oh no, this already sounds like the FI equivalent of this thread, building a na monster. How did you happen to have a few GT35s laying around? What about a 350Z? You know you'll need one of those too, right? Is the goal 1200+hp or 9s? Just curious, have you ever driven anything with over 100whp? What is your budget?
not sure if the op knows what to expect as a result of this.
but lets give time to the OP timeto explain himself...
i belive he is looking for somethign like this

^^^
i guess he can contact them, but all the other suggestions(forged, sound performance, mrc, gtm, forged, performance F, injected) are capable of building the OP a bad *** high whp setup. Still the OP needs to be clear on his budget cause it wont be cheap
Originally Posted by pimpsahab
check out GTM or Forged Performance or MRC and last but not least PERFORMANCE FACTORY! 1200hp=good luck and bye bye 6spd tranny and need of motec and a king of saudi arabia status bank account..but it probably can be done..GOOD LUCK

Originally Posted by XKR
Street driven 1200 whp
Are you really planning on doing this build....or just trying to make conversation 
Are you really planning on doing this build....or just trying to make conversation 
Originally Posted by undrgnd
Oh no, this already sounds like the FI equivalent of this thread, building a na monster. How did you happen to have a few GT35s laying around? What about a 350Z? You know you'll need one of those too, right? Is the goal 1200+hp or 9s? Just curious, have you ever driven anything with over 100whp? What is your budget?
Originally Posted by IIQuickSilverII
+1
not sure if the op knows what to expect as a result of this.
but lets give time to the OP timeto explain himself...
i belive he is looking for somethign like this

^^^
i guess he can contact them, but all the other suggestions(forged, sound performance, mrc, gtm, forged, performance F, injected) are capable of building the OP a bad *** high whp setup. Still the OP needs to be clear on his budget cause it wont be cheap
not sure if the op knows what to expect as a result of this.
but lets give time to the OP timeto explain himself...
i belive he is looking for somethign like this

^^^
i guess he can contact them, but all the other suggestions(forged, sound performance, mrc, gtm, forged, performance F, injected) are capable of building the OP a bad *** high whp setup. Still the OP needs to be clear on his budget cause it wont be cheap
Originally Posted by thawk408
They are in the 8's on stock Getrags.
8.62@171 Ryan Woon. 6 speed, 3.4L stroker, GT47-88, 100 shot, 3550lbs
8.75@165.5 SW/Chris Johnson/Boostlogic. 6 speed, 3.4L stroker, BL91 , 3650lbs
8.79@162 Darin Dichiara Full weight 6-speed, 3500 lbs, BW 75mm, 3.0L + nitrous28x10.5 ET drags
8.97@166.6 Paul Efantis/MSP Full weight 6speed
8.99@158 Jon Pratkanis 47-88, 3.0. 3610lbs All Boost 6spd
9.22@159 Saad Saad Intense Motorsports GT47-88, 6 speed, 3780lbs
9.30 @ 156 Matt Miller 6 speed Modded GT42-76 1.01A/R , 36XXlbs and CCW drag pack 26x11.5x16 Et streets
9.47@145 Jack ****/Virtual Works Full weight 76GTS 6speed
9.57@150 Ara Arslanian Bullish Racing Videos here 6 speed
9.66 @142mph ,Jessica Barton 6 speed, turbonetics 76mm turbo, motec, all boost...
9.68@152.52 Anthony Melber 6 speed/ Motorsports Performance
Registered User
iTrader: (1)
Joined: Sep 2007
Posts: 5,256
Likes: 0
From: Texas, Arizona,Cayman Island
Originally Posted by outlaw350z
Serious as cancer. i was going to do this build with a supra but i really dont like supras. whatever could be done to a supra can be done to a 350z, even better.
Originally Posted by outlaw350z
Im sure this topic has been covered but i will dig anyway. looking for a custom turbo system i already have the turbos(gt35)looking to make 1200+hp. i will be using the factory 6speed, mabey Haltec or motec ecu, abuilt motor with all the best parts. it will be street driven and of course taken to the drag strip. im looking for a proven shop to deliver a 9sec 6speed 350z. any help will appreciated. no flames please. please give details of the success of the shops.
JUST FYI, with all the supporting mods, your looking at a $80,000+ build most likely. And a 1200hp car is not streetable at 1200hp, just so you know. a 500hp street level with the capabilities of doing 1200hp is possible. To go 9's, depends on what the driver does with it,but your looking at another several thousand in proper safety equipment.
Originally Posted by outlaw350z
my goal is not to build a monster just a solid street tire car that can beat up on 5.0's and supras. i have owned a NSX before, and ive driven a couple of supercharged Mustangs low 11's. mabey i will have to add teach me how to drive a 1200hp carto my list.
Originally Posted by rb26ina240
yes they are in the 8's on stock getrags.
8.62@171 Ryan Woon. 6 speed, 3.4L stroker, GT47-88, 100 shot, 3550lbs
8.75@165.5 SW/Chris Johnson/Boostlogic. 6 speed, 3.4L stroker, BL91 , 3650lbs
8.79@162 Darin Dichiara Full weight 6-speed, 3500 lbs, BW 75mm, 3.0L + nitrous28x10.5 ET drags
8.97@166.6 Paul Efantis/MSP Full weight 6speed
8.99@158 Jon Pratkanis 47-88, 3.0. 3610lbs All Boost 6spd
9.22@159 Saad Saad Intense Motorsports GT47-88, 6 speed, 3780lbs
9.30 @ 156 Matt Miller 6 speed Modded GT42-76 1.01A/R , 36XXlbs and CCW drag pack 26x11.5x16 Et streets
9.47@145 Jack ****/Virtual Works Full weight 76GTS 6speed
9.57@150 Ara Arslanian Bullish Racing Videos here 6 speed
9.66 @142mph ,Jessica Barton 6 speed, turbonetics 76mm turbo, motec, all boost...
9.68@152.52 Anthony Melber 6 speed/ Motorsports Performance
8.62@171 Ryan Woon. 6 speed, 3.4L stroker, GT47-88, 100 shot, 3550lbs
8.75@165.5 SW/Chris Johnson/Boostlogic. 6 speed, 3.4L stroker, BL91 , 3650lbs
8.79@162 Darin Dichiara Full weight 6-speed, 3500 lbs, BW 75mm, 3.0L + nitrous28x10.5 ET drags
8.97@166.6 Paul Efantis/MSP Full weight 6speed
8.99@158 Jon Pratkanis 47-88, 3.0. 3610lbs All Boost 6spd
9.22@159 Saad Saad Intense Motorsports GT47-88, 6 speed, 3780lbs
9.30 @ 156 Matt Miller 6 speed Modded GT42-76 1.01A/R , 36XXlbs and CCW drag pack 26x11.5x16 Et streets
9.47@145 Jack ****/Virtual Works Full weight 76GTS 6speed
9.57@150 Ara Arslanian Bullish Racing Videos here 6 speed
9.66 @142mph ,Jessica Barton 6 speed, turbonetics 76mm turbo, motec, all boost...
9.68@152.52 Anthony Melber 6 speed/ Motorsports Performance
To the OP.....it seems you are not clear on what you are really looking for. If am correct you have mentioned wanting a 9 sec Z with 1200 whp; to be able to beat Mustangs etc; and for this to be a streetable set-up .
Please do not be offended but do you have ANY idea what kind of power you're talking about?? That kind of set-up would be very extreme for the street. Traction more so than horsepower becomes an issue.
The entire drivetrain (ie axles/a-arms etc) & suspension would need to beefed up big time to effectively handle the power. Even chassis flex would become an issue. There are just alot of things that will have to be addressed in order to have the car handle correctly. You are talking serious $$$. I belive someone quoted $80K, and that sounds about right.
Is it worth it??? IMO not really. To me; for the money anything beyond 600 whp is a waste on the street. I would suggest you do more research to get a feel for different levels of power. Try finding a few people with different set-ups and get a ride. It will give you a better idea what these power levels feel like and how they affect the car. Good luck!!
Please do not be offended but do you have ANY idea what kind of power you're talking about?? That kind of set-up would be very extreme for the street. Traction more so than horsepower becomes an issue.
The entire drivetrain (ie axles/a-arms etc) & suspension would need to beefed up big time to effectively handle the power. Even chassis flex would become an issue. There are just alot of things that will have to be addressed in order to have the car handle correctly. You are talking serious $$$. I belive someone quoted $80K, and that sounds about right.
Is it worth it??? IMO not really. To me; for the money anything beyond 600 whp is a waste on the street. I would suggest you do more research to get a feel for different levels of power. Try finding a few people with different set-ups and get a ride. It will give you a better idea what these power levels feel like and how they affect the car. Good luck!!
Originally Posted by outlaw350z
my goal is not to build a monster just a solid street tire car that can beat up on 5.0's and supras. i have owned a NSX before, and ive driven a couple of supercharged Mustangs low 11's. mabey i will have to add teach me how to drive a 1200hp carto my list.


