....

 

delete

 

glad things are coming along cass....keep working at it man

 

Blinkerfluid is a friend of my that is local and is a Mod on a local car forum.

Shocka04 - please delete your post as well. Putting out there info that may/may not be accurate is not cool. If you have an actual issue, PM a mod. My thread is not about Mid-A drama.

 

Thanks man - I just don't want to let this stray.

sleeper666 - please delete any OT posts as well. Thank You.

 

Thanks Tyler - its a lot of hurry up and wait right now, which is very frustrating. I am thankful that spring is coming late and the nice days seem to be few and far between. Glad to see that your are happy with your project results and all is going well for you.

 

yeah until yesterday when my berk high flow cat plugged on me, my cars not the fastest car in the world but it holds its own and is alot of fun...way more than it was n/a lol...dont wanna stray the thread but heres a quick pic...what u think about that...only 1100 miles on it..its not blue just looks that way from my flash on my phone

 

sure i would be glad to delete my post as soon as they do..
back on topic.. this build is alot like the government for sure hurry up and wait... hopefully you will get some good news on tues.. as long as things go well... and any shop that has a engine dyno is serious.....

 

hmmm i guess your were wrong.......
so casss hopefully tomorrow is the big day.....maybe we can talk if you still want to go to Z days.. i am talking with JUSTIN.. because i probably wont be able to make it because of the baby..and the job..

 

Just heard from Frank who spoke to Jim Justice. Two rods need to be replaced and the block is done (as in FAIL, not ready to go), pistons and cams are also done, but I already knew that. The pistons scored the cylinder walls too deep to be saved without sleeving the block. The big day is tomorrow - heads are being evaluated. Dropping turbos off for evaluation tomorrow as well.

Looks like the build just got another $1K expensive to find a donor block to re-build .

Soooo close to just putting the turbos on the stock block right now.

 

Don't give up! I want to see another real Mid-A beast!

 

yeah man you cam this far you cant back out now...

 

Core's are much less expensive then they were a year ago. I have seen a lot of them for $500 on this forum. Look around. Many available. Good Luck Cass.

 

+1

I just got a complete rev-up block shipped from AZ it GA for $725 shipped.

 

The results are in.....

Turbos - Need new bearing cartridges
Block - Shot
Heads - Junk (only the springs and retainers are good) the valves are too short for being sunk in the original valve job that they are too short to use in a normal head
Rods - 2 are shot
Bearings, pistons and cams are all scrap
Oil pump is garbage as well

Its actually the worst possible result and I just need a few days to process the magnitude of this FAIL and what I want to do.

 

OMG!

Cass...Im terribly sorry to hear this. Let me know if there is anything I can do to help. That includes drinks on me the next time we get together.

Edit: Just saw that TurboTim has some rev-ups for sale that were oil consumption motors for $600. They're perfect for a core

 

Even the turbo's? That a heartache....now's the time for a refund on the washer/dryer! TurboTim (SFR) has been around since the beginning of turboing 350Z's.

 

Sorry to hear this Cass!

 

Are you just measuring the level of fail over at justice or are they going to do any forensics as well? Sorry to hear of so much fail...

 

yeah man sorry to hear about all of that. definately a run of bad luck