Notices
Forced Induction Turbochargers and Superchargers..Got Boost?

Ughhh, all of a sudden got these codes. FML. Help!

Thread Tools
 
Search this Thread
 
Old 08-26-2009, 01:30 PM
  #1  
Vas@Extended
Vendor - Former Vendor
Thread Starter
iTrader: (17)
 
Vas@Extended's Avatar
 
Join Date: Feb 2007
Location: Westchester NY
Posts: 1,569
Likes: 0
Received 0 Likes on 0 Posts
Default Ughhh, all of a sudden got these codes. FML. Help!

So all of a sudden today.. My car was acting weird... I thought maybe since it was around 90* here in NY maybe that had something to do with it...

Car felt like it was bugging.. and all of a sudden randomly just turns OFF... It happened about 6 times today. From 1PM - 5PM... It would not turn off when I was driving the car normally / cruising.. only when I would come to a stop.. or when taking a turn when down shifting

I went to get the codes read.. here is what I got..

P1111 MFR control Fuel air metering

P1136 MFR Control Fuel air metering ( got it twice )

P0327 Knock Sensor 1 circuit low input bank 1 sensor

P0300 Random/multiple cylinder misfire detection


What do you think this could be??.. Iam so scared and frustrated right now.. Iam going to check into them tomorrow.. take the plugs out etc. Whatever that needs to be done.

Car has been running perfectly fine until today.

My AF was always 11.2-11.3 at WOT
I have an 03 6 MT


Thanks for any help fellas!
Old 08-26-2009, 05:37 PM
  #2  
Chef-J
Booooosstt!!
iTrader: (58)
 
Chef-J's Avatar
 
Join Date: Mar 2007
Location: Dallas/NewYork/Michigan/Korea
Posts: 5,311
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm assume, failing MAF or there is leaking somewhere. And keep your eyes on knock sensor, if it comes back on you might have a bad knock sensor.
Old 08-26-2009, 06:39 PM
  #3  
Vas@Extended
Vendor - Former Vendor
Thread Starter
iTrader: (17)
 
Vas@Extended's Avatar
 
Join Date: Feb 2007
Location: Westchester NY
Posts: 1,569
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Chef-J
I'm assume, failing MAF or there is leaking somewhere. And keep your eyes on knock sensor, if it comes back on you might have a bad knock sensor.
chef,

How much would a new MAF and knock sensor run me? do you have any idea?
Old 08-27-2009, 03:12 AM
  #4  
Chef-J
Booooosstt!!
iTrader: (58)
 
Chef-J's Avatar
 
Join Date: Mar 2007
Location: Dallas/NewYork/Michigan/Korea
Posts: 5,311
Likes: 0
Received 0 Likes on 0 Posts
Default

When did you replace to new? Who installed them?

Most of problems I have saw and read, pretty much bad harness. Knock sensor itself usually won't go bad that easy, I do remember _jb had knock sensor light on, he found out harness was messed. It is really hard to point at one. P1136 is related with fuel trim too lean. so I would say, its good to start from leaks and check all the wires. I heard from few people said that they had p1111 issue when they had dirty oil. But this is just hearing from people.

I wouldn't just clear it and give a try again. Sounds like something wrong somewhere.
Old 08-27-2009, 04:57 AM
  #5  
str8dum1
New Member
iTrader: (11)
 
str8dum1's Avatar
 
Join Date: Oct 2007
Location: raleigh-wood NC
Posts: 8,807
Likes: 0
Received 6 Likes on 6 Posts
Default

wow that could get expensive.

just reset it all and see if they come back
Old 08-27-2009, 05:39 AM
  #6  
djamps
Registered User
iTrader: (1)
 
djamps's Avatar
 
Join Date: Dec 2008
Location: MD
Posts: 4,492
Likes: 0
Received 9 Likes on 9 Posts
Default

Sounds like a bad connector, ground or harness.
Old 08-27-2009, 07:10 AM
  #7  
Vas@Extended
Vendor - Former Vendor
Thread Starter
iTrader: (17)
 
Vas@Extended's Avatar
 
Join Date: Feb 2007
Location: Westchester NY
Posts: 1,569
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by str8dum1
wow that could get expensive.

just reset it all and see if they come back
hah yeah no kidding..the MAF sensor alone is like 300... which way should I go about reseting them? taking the Negative out of the battery.. or do the pedal procedure ?

Thanks guys!
Old 08-27-2009, 11:29 AM
  #8  
Glex25
Registered User
iTrader: (11)
 
Glex25's Avatar
 
Join Date: May 2005
Location: New Jersey
Posts: 1,301
Likes: 0
Received 0 Likes on 0 Posts
Default

If you are looking for a MAF sensor someone is selling one with the housing and all on Driver

http://g35driver.com/forums/engine-f...af-sensor.html
Old 08-28-2009, 03:43 PM
  #9  
tony_t
Registered User
iTrader: (1)
 
tony_t's Avatar
 
Join Date: Sep 2007
Location: oregon
Posts: 148
Likes: 0
Received 1 Like on 1 Post
Default

I bought a maf off ebay for like 50-75 bucks brand new. I bought it because I thought mine was bad, turns out it wasnt. I thought it couldnt be an oem quality unit. But when I received the maf it looked EXACTLY the same down to all the little serial numbers and strange symbol. I usually stay away from ebay shat but it was worth a try and I am still using the cheap sensor works good.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
XM 1
Engine & Drivetrain
29
07-10-2022 07:44 AM
gc350z03
Forced Induction
114
10-28-2016 05:00 PM
hulkout
Tuning
1
09-30-2015 12:33 PM
RyansZ33
Maintenance & Repair
8
09-15-2015 05:54 AM



Quick Reply: Ughhh, all of a sudden got these codes. FML. Help!



All times are GMT -8. The time now is 05:06 AM.