Chris@FsP

iTrader: (4)

Looks good.

BoostedProbe

iTrader: (9)

Hope you guys like clean stainless (304) hardware:





With this, all I do is cut the head off of a bolt and just weld it on there as a stud. Works great, have been doing that for a long time. It' cleaner as well.





















Looking at the last picture, maybe it would be a good idea to paint the hardware black.

350Z400rwhp

iTrader: (4)

Looks Great!

binder

iTrader: (8)

sick intercooler

we'll have some issues with the g setup though. I don't have that nice intake hole that the 350z has in the core support.

BoostedProbe

iTrader: (9)

Not a big deal, one can always pipe it around so it comes up in front of the wheel well on the drivers side.

binder

iTrader: (8)

that's what i figured.


built motor is in my car. drove it home tonight but it needs a lot of bugs worked out.

bigcloud

iTrader: (7)

Looking good Sasha!! I love the craftsmanship!!

MI 35th

iTrader: (16)

beautiful Front mount sasha, that looks like some decent bling.

BoostedProbe

iTrader: (9)

This IC will support the flow of any single turbo you can put in there.


Don, I can't wait for you to get this installed and straped to the dyno. What EMS are you tuning with?

MI 35th

iTrader: (16)

I am currently tuning with a Haltech.

I am rather excited as well, I am afraid I will need a bigger and better clutch.

binder

iTrader: (8)

when do you plan on dynoing? I could take a trip down to visit my fiance's family at that time and swing by the shop. I need to get mine tuned also but i'm going to wait until the spring since i can't drive it all winter anyways.

Sylvan Lake V35

iTrader: (23)

For the JWT TT kit on a G you use a hole saw to cut a hole in the same spot as the one on 350Zs. It looks fine and the installer said its painless to do.

binder

iTrader: (8)

ah, good idea. I'll have to take a look at it tomorrow because right in front of my vortech airfilter are all the a/c lines and i think that's right where the 350z has that intake scoop. i'll find out.

Sylvan Lake V35

iTrader: (23)

I put my front bumper back on or i would take pics but its right beside the AC lines JWT web site might have the template in the install manual.


Found it page 4

http://www.jimwolftechnology.com/wol...06-13-2007.pdf

str8dum1

iTrader: (11)

What size is the JWT pipe thru there? I think its smaller than 2.5", maybe 2.25" Still would prolly work just fine with BP's kit

binder

iTrader: (8)

it says 3" hole saw so a 2.5" pipe should fit

BoostedProbe

iTrader: (9)

It does say 3", but the piping from the IC to the TB is 3" as well. I could change that (if/when you get a kit) to 2.75", and it would probably slide through.

Thanks for the link Gord.

str8dum1

iTrader: (11)

^thats what i was concerned with as he was using 3" oin his kit and the JWT is only 3" hole.

if you look where its cut, its a very tight squeeze with your AC lines, so the smaller the pipe BP can make the better

BoostedProbe

iTrader: (9)

Just for the record, NEVER USE DHL FOR SHIPPING. What a cluster f...ck. They need so much paper work once the item reaches customs, it's unreal. Customs forms, proof of purchase....bla bla bla.. What a joke.

MI 35th

iTrader: (16)

UPS or Fedex FTW. My father works for Astar, DHL as a pilot and even he dislikes what the carriers have become.