My powerlab gt37 numbers
#1
New Member
Thread Starter
iTrader: (8)
Join Date: Oct 2008
Location: S.Africa
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
OK, so at last i manged to fix my utec voltage and some breathing issues.....power kept dropping at around 5500rpm.
After a 4hour dyno session my DW600 injector was maxed.
Keep in mind it made stock 202whp on the same dyno a while back....dyno was calibrated two days ago.
-437whp with 7.8psi, 95 pump, power all the way to 7000rpm.
Then manage about double spring pressure on my MBC
-542whp/464lb/ft with 15.5psi, 100 race fuel power to 7000rpm....ran a bit leaner due to IDC with very conservative timing.
will post up sheet tomorrow.
After a 4hour dyno session my DW600 injector was maxed.
Keep in mind it made stock 202whp on the same dyno a while back....dyno was calibrated two days ago.
-437whp with 7.8psi, 95 pump, power all the way to 7000rpm.
Then manage about double spring pressure on my MBC
-542whp/464lb/ft with 15.5psi, 100 race fuel power to 7000rpm....ran a bit leaner due to IDC with very conservative timing.
will post up sheet tomorrow.
Last edited by marra23; 12-03-2009 at 12:14 PM.
#4
Registered User
iTrader: (35)
Join Date: Nov 2007
Location: louisvile KY
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
he probably was running high octane to get that much power out of 600cc inj. I bet your IDC is way too high.
great #'s in for dyno sheet.
great #'s in for dyno sheet.
Last edited by frankie945; 12-03-2009 at 12:26 PM.
#6
New Member
Thread Starter
iTrader: (8)
Join Date: Oct 2008
Location: S.Africa
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
My intention is only to run high boost map for a few 1/4 passes if my axles last
![](https://my350z.com/forum/images/smilies/icon38.gif)
Trending Topics
#10
Registered User
iTrader: (4)
Join Date: Apr 2009
Location: Puerto Rico
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Not knocking your numbers, since 550whp is no slouch....but why not stick with the GT35R and get those same exact numbers with less lag? Unless you wish to push it upwards of 650whp ( I have no idea what your plans are ).
#14
Registered User
#18
New Member
Thread Starter
iTrader: (8)
Join Date: Oct 2008
Location: S.Africa
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Lets see how it goes now.
I don't think the gt35r would if made the same power at set manifold pressure, especially at the top rpm range.
They recon altitude loss on turbo cars 3% around here, numbers corrected accordingly.
Last edited by marra23; 12-03-2009 at 09:52 PM.
#19
Registered User
iTrader: (4)
Join Date: Oct 2007
Location: Columbus
Posts: 1,304
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Lag's my friend, i have much more traction out blocks and as soon as i hit higher gears you're always in the boost....prob was just loosing power after 5500rpm in past.
Lets see how it goes now.
I don't think the gt35r would if made the same power at set manifold pressure, especially at the top rpm range.
They recon altitude loss on turbo cars 3% around here, numbers corrected accordingly.
Lets see how it goes now.
I don't think the gt35r would if made the same power at set manifold pressure, especially at the top rpm range.
They recon altitude loss on turbo cars 3% around here, numbers corrected accordingly.
![thumbup](https://my350z.com/forum/images/smilies/biggthumpup.gif)