Ditched my vortech: Built motor, greddy twins, budget build: updated 9-18-2010
04-18-2015, 06:11 PM
#381
hatersgonnahate
Thread Starter
iTrader: (162)
yeah the oem wiring is perfect.
There is no tuning difference like injector balance in my tune except a 1% adder for cyl 2. I run a cosworth which hopefully corrects this. I also let the Haltech balance the AFR with auto corrections for each bank.
There is no tuning difference like injector balance in my tune except a 1% adder for cyl 2. I run a cosworth which hopefully corrects this. I also let the Haltech balance the AFR with auto corrections for each bank.
01-31-2016, 04:19 PM
#382
hatersgonnahate
Thread Starter
iTrader: (162)
She got new eyes:
Changed the bay up some
Recirced the wastegates:
Swapping out the ARC for a Greddy Revolution 3 dual:
Had to remove the neckdown and converted to 3" vband
Cleaned up some more of the harness:
a little fun:
Changed the bay up some
Recirced the wastegates:
Swapping out the ARC for a Greddy Revolution 3 dual:
Had to remove the neckdown and converted to 3" vband
Cleaned up some more of the harness:
a little fun:
02-09-2016, 03:37 PM
#384
hatersgonnahate
Thread Starter
iTrader: (162)
I took all of nissans crap off and then removed the wiring for the washer fluid tank, rerouted the stuff for the front of the car...resleeved it all and put it all back in place. Nice and clean.
The following users liked this post:
Resmarted (02-11-2016)
Thread
Thread Starter
Forum
Replies
Last Post
