LS2 350z Stage 3? =)
03-10-2011, 09:49 AM
#81
Theres no issue at all. Last year I ran 325/45/17s(which are the exact same size tire as a 325/40/18) with 0 issues. The rims/tires actually sat inside the fenders a little. I had my fenders lightly stretched and since im not running a coil over setup, ill have some room to spare. The only issue like mentioned above is the ride is a little "soft" with such a tall sidewall tire. Unfortunately, I have no choice but to run a tire that size or id be lucky to beat a stock honda from all the tire spin.
03-10-2011, 01:42 PM
#82
Theres no issue at all. Last year I ran 325/45/17s(which are the exact same size tire as a 325/40/18) with 0 issues. The rims/tires actually sat inside the fenders a little. I had my fenders lightly stretched and since im not running a coil over setup, ill have some room to spare. The only issue like mentioned above is the ride is a little "soft" with such a tall sidewall tire. Unfortunately, I have no choice but to run a tire that size or id be lucky to beat a stock honda from all the tire spin.
Actually, the 325/40/17 is about 1/4" taller than the 325/40/18! I run a Mickey Thompson ET Street, I know what you mean about the "soft" ride with the tall sidewall.
03-10-2011, 03:58 PM
#83
Yeah this beast does spin like a little BitsH! lol. Its super loud and annoying, i cant wait to smoke you while you run your street tires and i run my skinny jeans hahaha :P
Looking sick homie, cant wait to see it in the streets soon. Weather is getting better, after all this rain the salt should be washed off, get that z ready son!!!
Looking sick homie, cant wait to see it in the streets soon. Weather is getting better, after all this rain the salt should be washed off, get that z ready son!!!
03-12-2011, 06:25 PM
#85
The engine is all together. Just need to torque down the rocker arms which ill do once the engine is in the car(to keep the valves closed and any **** out of the engine) Since everything in the engine bay is going to be black I figured id off set it a little with a wrinkle red compressor cover and valve covers.
03-13-2011, 10:21 AM
#88
No. I was going to get it but then I heard people had tuning issues with it. And for FI, I don't really think its needed. Maybe next year when I have nothing left to do to the car ill start adding things like that. But for this year the 90 will do just fine.
03-15-2011, 11:00 PM
#91
Got a lot of work done tonight. Welded little block off plates in the holes where the old harness and wires used to go through, sanded and painted the engine bay, bled the clutch, finished the wiring, mounted the engine in place, ect. Not much more to go as far as getting it running. I still have to finish the front end and mount the radiator and new lines. Ive decided to put an oil cooler on the car to help with temps. The cooler will be mounted in the driver side well in front of the tire.
03-15-2011, 11:21 PM
#93
No. They are both standalone. They don't have to be linked to eachother. The only responsibility of the GMECU is to control the engine. It has nothing to do with the car itself. All the gauges work off the car itself minus the tach and water temp gauge.
03-16-2011, 12:19 AM
#94
did you leave the nissan engine harness plugged into the ecu? did you modify the nissan harness at all?
sorry for the questions, wirings not my thing, i hate it lol
