Hey guys, heres my big question, ive got an 08 350 with the vq35hr engine and im looking to do a single turbo build. That being said i know people will have their own opinions on twins and whatnot but thats for another thread, my question is, is there a way that you can use the single throttle body intakes on the HR engine just like some people were trying to switch the HR intake into the DEmotors? or is there any aftermarket intakes even out on the market. theres so little aftermarket support for the HR's the only 2 feasible options ive seen thus far is using the stillen intake from the g37 (dont even know if that would bolt up) but using that to switch both throttle bodies to the same side which stillen is apparently trying to be fort knox on selling someone an individual intake. Or the other option is creating a custom intercooler that has one in side on the bottom then 2 out sides on the top to each side of the stock intake but i feel like the air distribution wouldnt be even through that either if im right? I know this is a ton of information that not many people really know about but any help at all is majorly appreciated. Thanks guys.

 

The stock intake manifold is open inside, not divided.

 

Look in the forced induction section theres a race build hr with a custom single intake and a single turbo set up. For an Australian road race car or somen

 

That is a big question for your first post.

 

or you can find an intercooler with 1 in and 2 outs

 

http://www.treadstoneperformance.com...bo+Intercooler
this was the only style that i could find that would work, but that dosnt include dimensional restraints. But as a template that seems as if i could work, one question on the intercooler itself though would be wouldnt the intake path to the left side intake be longer then the right side intake because it has to cross the entire length of the intercooler unlike the right side? i dont know if anyone has experience in that dept. And in reference to stock07g35s .....yes it is thanks lol

 

bump anyone?

 

Please, read my post above again.