Hey Everyone Im getting a SEL light so i went to autozone and got the code pulled

its states the following

p0441
Evaporative Emission Control System Incorrect Purge Flow


What the hell does this mean??!

 

you forgot to plug something back in..cheak the sensors near the throttle body.

 

i got the same thing and it was my MAF sensor not plugged in all the way

 

Check my instructions on the install. Most likely you have a plugged fitting on the new plenum. That's what happened to me. It was the vacuum hose connection that was plugged with the glue they used to hold it in.

http://www.350zfreak.com/plenum.htm

-Chris

 

your 100% correct dude...i already found this a few days ago.... hole was completly blocked

 

my buddy has same exact code 0441 and has ssv manifold installed then code came....which hose was blocked xlacrosse? the two on the left side of manifold are not blocked i stuck a pick tool all the way in to make sure but i havent check the rear since its hard to get to...

 

nm fixed...the installer who put on manifold pinched the hose that goes under manifold towards the back and put them on backwards