For those who installed a short shifter..part needed
Thread Starter
Joined: Feb 2004
Posts: 8,830
Likes: 3
From: PRODUCT OF BROOKLYN 718 USA
For those who installed a short shifter..part needed
I need a part from the stock shifter if you have it. I'm looking for the stock shifter sleeve that goes on the stock shifter. The sleeve resembles a barrel and goes on the bottom of the shifter. I lost this part when I installed the B&M shifter and will reinstall the stock shifter and need this part. I also would like the stock shifter plate as mine was modified to work with the B&M shifter. I also will consider a trade of the B&M shifter for your stock and $50 if you'd like....
Thread Starter
Joined: Feb 2004
Posts: 8,830
Likes: 3
From: PRODUCT OF BROOKLYN 718 USA
it's just my girlfriend can't drive the car with the shifter since the gears are too close. I guess I'm tired of always driving when we take trips somewhere.
Thread Starter
Joined: Feb 2004
Posts: 8,830
Likes: 3
From: PRODUCT OF BROOKLYN 718 USA
I did but Tony stated I have to buy the whole shifter if I wanted that one little piece. I still have my stock shifter but I need that sleeve or I can't use the stock shifter again.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
m_0g
Audio, Video & Electronics (DIY)
12
Jun 3, 2021 10:05 AM
