passenger windows does NOT work. please help
hi,
my passenger window does not work. I can roll the windows down fine, but it does not go back up. Therefore, I do not think the motor is busted.
Could it be the switch is bad? thanks
my passenger window does not work. I can roll the windows down fine, but it does not go back up. Therefore, I do not think the motor is busted.
Could it be the switch is bad? thanks
yeah it is the motor
Mine did the same thing.
One way to get it to go back up is to have car on, open door, hold window switch up, and close door while keeping switch up. This only worked for a while before the motor was toast.
Mine did the same thing.One way to get it to go back up is to have car on, open door, hold window switch up, and close door while keeping switch up. This only worked for a while before the motor was toast.
Originally Posted by VandyZ
yeah it is the motor
Mine did the same thing.
One way to get it to go back up is to have car on, open door, hold window switch up, and close door while keeping switch up. This only worked for a while before the motor was toast.
Mine did the same thing.One way to get it to go back up is to have car on, open door, hold window switch up, and close door while keeping switch up. This only worked for a while before the motor was toast.
thanks
Originally Posted by zzz350zzz
hi,
my passenger window does not work. I can roll the windows down fine, but it does not go back up. Therefore, I do not think the motor is busted.
Could it be the switch is bad? thanks
my passenger window does not work. I can roll the windows down fine, but it does not go back up. Therefore, I do not think the motor is busted.
Could it be the switch is bad? thanks
Trending Topics
Originally Posted by zzz350zzz
is it possible for the switch to go wrong? How likely compared to the motor? I don't want to waste money to replace something still working.
thanks
thanks
www.my350z.com/forum/showthread.php?t=142013
Originally Posted by zzz350zzz
is it possible for the switch to go wrong? How likely compared to the motor? I don't want to waste money to replace something still working.
thanks
thanks
If the wieres attached to the clips that goes on the switch r loose then the motor is not geting any electric current to work and by default you would think its the motor thats what i think is the cheepest to do and check for the moment. take care and i hope this was helpfull.
Last edited by silver nismo; Aug 12, 2006 at 11:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post





