When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Update: had a chance to work on the car and removed all injectors. Got it flow tested and found one of them had an erratic spray pattern. But flow is pretty consistent on all 6.
Is the spray pattern enough to cause the misfire?
If it was, pulling the coil on that cylinder would cause the missfire to go away. To verify swap that injector around and mark it. Then pull the coil on the cylinder that has the injector in question.
I can't play your videos here, so ill watch them later
09-10-2013, 11:43 AM
