My daily driver: 1st Domestic Bagged Chrysler 300c
#1
My daily driver: My 1st Domestic Bagged...Chrysler 300c
My first domestic...ever.
My current mods:
-ECU Reflash via Diablo Predator
-LMI CF Hammer Intake
-JBA Midpipes w/ gutted cats
-Custom 2.5 Mandrel Bent exhaust w/ X-pipes and Magnaflow mufflers
-Custom Koni Yellow Shocks
-UAS Airbag Suspension
-Accuair leveling system w/ touchpad
-SPC Camber Arms
-Pedders Front Radius Rod Bushings
-22" 3-piece Step Lip Forged Wheels
-Slotted Rotors
-Alpine Head deck
-Polk Audio Sounds
-JP Vizage Trunk Spoiler
-VIP Roof Spoiler
-Blacked out side markers
-Grip Front Grille
-22Elite Interior
I plan to run the following mods following Xmas:
Exterior:
-Lexus Starfire Pearl Paintjob
-Weathertech dark window visors
-Flashtech headlight halos in white
-Shine front and rear lips
-Stealth Auto Clear front sidemarkers
-V-LED's Front Sidermarkers
-V-LED's Front Turn Signal Switchbacks
-V-LED's Rear Turn Signals
-V-LED's Rear Tail Bulbs
-BT Chrysler Ribbon Front Emblem (Black anodize)
Interior:
-Full 300C SRT8 Interior swap
-Leather wrapped dash and door panels with white double stitching
-Alcantara pillars and headliner
-Billet Mirror Bezel Control Kit (Satin)
-Billet Wiper & High Beam Stalk Cover (Satin)
-Billet Door Lock Kit/Designer Series (Satin Designer Series)
-BT Signature Pedal Kit & Dead Pedal (Satin w/Clear Anodize)
-BT Headlight and AC Control ***** (Satin Designer Series)
-Billet Shift Insert (Black Anodize)
-Billet Technology Pink Thingy
-Black Cat Customs Black face w/ Silver numbers & red lighting Gauge face cluster & clock
-LXHarness aka "Diboblo" Full Interior Red/White LED swap
-LXcustomsolution White Needle Pointers w/ red led's
-Full Dynomat
Engine/Drivetrain:
-Taylor 10.4mm Shorty Ignition wires in Black
-SLP Underdrive Pulley
-Polished MMC 85mm Throttle Body
-Polished Timing Cover
-Polished 6.1L Oil Pump
-Inertia Big Valve Head milled for 10.1:1 Compression
-Inertia SRT Max Cams
-Crower Timing Kit
-Pro Torque (Torque Converter)
-Kooks Headers w/ skid plates made by L-con Racing
-Kooks Midpipes
-6.1 Six Speed Motor Mounts
-Billet Technology Oil Catch Can in Satin w/ black braided lines
-Billet Technology Underhood Kit in Anodized black
-Billet Technology EGR Block Off Plate
-Billet Throttle Body Cover (Polished)
-Billet Valve Covers (Polished)
-Billet Coil Pack Covers (Polished)
-BT EGR Block Off Plate (Satin w/ clear anodize)
-BT Catch Can Nickle Fittings
-Billet Water Neck (Polished)
-3GKustomz ABS Cover, Fuse Box Cover, Firewall Cover, Right Side Cover, Engine 1/2 Covers, and Radiator Shroud Cover
-Speedlogix Coolant Tank Top Overflow Braided Hose Kit in Black w/ Satin ends
-Speedlogix Coolant Tank Rear Line Braided Hose Kit in Black w/ Satin Ends
Suspension:
-Pedders Front LCA Bushings
-Pedders Front Lower Shock Bushing
-Razor's Edge Rear 4 Pt Strut Brace
Brakes:
-AMG 8 Pot front & 4 pot Rear custom BBK
PHASE 2:
-Nuformz Novi 1500 SC Kit
-Polished TB, piping, SC, and FMIC
-CTP custom Air-to-air FMIC
-Fore Fuel Hat w/ Dual e85 Walbros
-ID 1000 e85 safe injectors
-Upgraded fuel line
-ATI 5.7 2% OD damper
-crank pinning kit
-AEM Boost Gauge
-AEM Wideband Gauge
-Razors Edge Dual Overhead Gauge Pod
-Paramount performance upgraded valve body
-2010 axles, hubs, driveshaft, getrag 3.06 LSD
Exterior:
-OEM headlights retrofitted with Q45 Kouki Projectors
-OEM foglights retrofitted with Morimoto Bixenon fog projectors
Interior:
2010 Challenger SRT8 front seats
Suspension:
Suspension rehaul coming soon. Details will be released when product is released to the public!
More current version:
My current mods:
-ECU Reflash via Diablo Predator
-LMI CF Hammer Intake
-JBA Midpipes w/ gutted cats
-Custom 2.5 Mandrel Bent exhaust w/ X-pipes and Magnaflow mufflers
-Custom Koni Yellow Shocks
-UAS Airbag Suspension
-Accuair leveling system w/ touchpad
-SPC Camber Arms
-Pedders Front Radius Rod Bushings
-22" 3-piece Step Lip Forged Wheels
-Slotted Rotors
-Alpine Head deck
-Polk Audio Sounds
-JP Vizage Trunk Spoiler
-VIP Roof Spoiler
-Blacked out side markers
-Grip Front Grille
-22Elite Interior
I plan to run the following mods following Xmas:
Exterior:
-Lexus Starfire Pearl Paintjob
-Weathertech dark window visors
-Flashtech headlight halos in white
-Shine front and rear lips
-Stealth Auto Clear front sidemarkers
-V-LED's Front Sidermarkers
-V-LED's Front Turn Signal Switchbacks
-V-LED's Rear Turn Signals
-V-LED's Rear Tail Bulbs
-BT Chrysler Ribbon Front Emblem (Black anodize)
Interior:
-Full 300C SRT8 Interior swap
-Leather wrapped dash and door panels with white double stitching
-Alcantara pillars and headliner
-Billet Mirror Bezel Control Kit (Satin)
-Billet Wiper & High Beam Stalk Cover (Satin)
-Billet Door Lock Kit/Designer Series (Satin Designer Series)
-BT Signature Pedal Kit & Dead Pedal (Satin w/Clear Anodize)
-BT Headlight and AC Control ***** (Satin Designer Series)
-Billet Shift Insert (Black Anodize)
-Billet Technology Pink Thingy
-Black Cat Customs Black face w/ Silver numbers & red lighting Gauge face cluster & clock
-LXHarness aka "Diboblo" Full Interior Red/White LED swap
-LXcustomsolution White Needle Pointers w/ red led's
-Full Dynomat
Engine/Drivetrain:
-Taylor 10.4mm Shorty Ignition wires in Black
-SLP Underdrive Pulley
-Polished MMC 85mm Throttle Body
-Polished Timing Cover
-Polished 6.1L Oil Pump
-Inertia Big Valve Head milled for 10.1:1 Compression
-Inertia SRT Max Cams
-Crower Timing Kit
-Pro Torque (Torque Converter)
-Kooks Headers w/ skid plates made by L-con Racing
-Kooks Midpipes
-6.1 Six Speed Motor Mounts
-Billet Technology Oil Catch Can in Satin w/ black braided lines
-Billet Technology Underhood Kit in Anodized black
-Billet Technology EGR Block Off Plate
-Billet Throttle Body Cover (Polished)
-Billet Valve Covers (Polished)
-Billet Coil Pack Covers (Polished)
-BT EGR Block Off Plate (Satin w/ clear anodize)
-BT Catch Can Nickle Fittings
-Billet Water Neck (Polished)
-3GKustomz ABS Cover, Fuse Box Cover, Firewall Cover, Right Side Cover, Engine 1/2 Covers, and Radiator Shroud Cover
-Speedlogix Coolant Tank Top Overflow Braided Hose Kit in Black w/ Satin ends
-Speedlogix Coolant Tank Rear Line Braided Hose Kit in Black w/ Satin Ends
Suspension:
-Pedders Front LCA Bushings
-Pedders Front Lower Shock Bushing
-Razor's Edge Rear 4 Pt Strut Brace
Brakes:
-AMG 8 Pot front & 4 pot Rear custom BBK
PHASE 2:
-Nuformz Novi 1500 SC Kit
-Polished TB, piping, SC, and FMIC
-CTP custom Air-to-air FMIC
-Fore Fuel Hat w/ Dual e85 Walbros
-ID 1000 e85 safe injectors
-Upgraded fuel line
-ATI 5.7 2% OD damper
-crank pinning kit
-AEM Boost Gauge
-AEM Wideband Gauge
-Razors Edge Dual Overhead Gauge Pod
-Paramount performance upgraded valve body
-2010 axles, hubs, driveshaft, getrag 3.06 LSD
Exterior:
-OEM headlights retrofitted with Q45 Kouki Projectors
-OEM foglights retrofitted with Morimoto Bixenon fog projectors
Interior:
2010 Challenger SRT8 front seats
Suspension:
Suspension rehaul coming soon. Details will be released when product is released to the public!
More current version:
Last edited by Rickdogg; 05-28-2013 at 11:43 AM.
Trending Topics
#8
Super Moderator
MY350Z.COM
MY350Z.COM
I'm diggin it!