NA Build: Kacz07's 2006 SS 350z RevUP
#503
Registered User
iTrader: (6)
Join Date: May 2005
Location: King of Materbation
Posts: 3,682
Likes: 0
Received 0 Likes
on
0 Posts
There has to be a common link to all these camshaft failures. I don't know if its harmonics or not but you're one of about a dozen people I know that snapped a cam. Some did it with big valve springs and some did it on OEM springs and cams. A local G35 turbo guy snapped his cam in half like a toothpick a few weeks ago. There has to be something more to all this. Fontana did it on one of their NA motors as well IIRC
What are the plans for the crankcase? This sounds interesting.
What are the plans for the crankcase? This sounds interesting.
When I replaced the stock cams with Nismo, the car had 25k miles. The dowel hole had cracked on the camshaft and the pin was so loose in the gear, I removed it with my finger tips.
He's not the only person who's had this happen too.
#508
New Member
He blow'd it up son. He blow'd it up good.
#509
Great thread btw.
Any ideas what's happened or happening with his car?
Any ideas what's happened or happening with his car?
#510
New Member
Holy crap!
All those posts & then warp speed of 7 years.
What a good thread. Now I see why certain mods are clearly defined in the stickies. Thanks for saving those of us with a new platform from expensive disappointments.
All those posts & then warp speed of 7 years.
What a good thread. Now I see why certain mods are clearly defined in the stickies. Thanks for saving those of us with a new platform from expensive disappointments.
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Intake Exhaust
26
11-29-2015 03:58 PM