96.5 11.0.1 88MM BC Crank NA build
Jan 24, 2012 | 10:42 AM
Joined: Jul 2009
Posts: 1,769
Likes: 8
From: So Cal
Quote:
Originally Posted by
cbass0916
For some reason my map lights are working improperly . I got new bulbs today and my right light only turns on after 5 clicks . Does anyone know how to fix this ? I must have reset something because I switched out the lights and it just keeps doing it . Appreciate some feed back! Thanks
Random post
Jan 24, 2012 | 11:10 AM
Joined: May 2009
Posts: 1,365
Likes: 0
From: earth
Quote:
Originally Posted by
e30cabrio
It is very very quiet closed.
nice! so you have the best of both worlds. and will have more power to the wheels with your cutout closed than i will with mine open most likely. jealous...
Feb 5, 2012 | 07:15 AM
Thread Starter
Joined: May 2010
Posts: 46,288
Likes: 2,686
From: Hear
The stroker had crazy MAF correction issues with my FrankenCAI.
First I had a dryer vent hose which worked but looked horrible. So I spent 2x.xx on this duct, it is giving the same IATs when moving I had from the CAI (7-10 degrees above ambient).
Feb 5, 2012 | 07:23 AM
Joined: Aug 2008
Posts: 7,418
Likes: 13
From: Long Island, NY
I want to do that with my HR. My IAT's are crap cuz of the short rams. If it doesnt work ill just plunk down for injens or stillens.
Feb 7, 2012 | 08:07 AM
Joined: May 2009
Posts: 1,365
Likes: 0
From: earth
where did you mount your cutout switch? i cant decide on a good place for mine
Feb 7, 2012 | 08:28 AM
Thread Starter
Joined: May 2010
Posts: 46,288
Likes: 2,686
From: Hear
It fit where I had a blank to the left of the steering wheel I assume where TCS would be if it had it. That isn't really helpful since you have a G.
Feb 7, 2012 | 08:37 AM
Joined: May 2009
Posts: 1,365
Likes: 0
From: earth
ok, yea, wish i had a blank spot there too, that would be perfect
Feb 7, 2012 | 06:52 PM
Joined: Oct 2005
Posts: 2,179
Likes: 46
From: Michigan
Too early to tell if you've kicked the oil consumption habit?
Feb 8, 2012 | 02:53 AM
Thread Starter
Joined: May 2010
Posts: 46,288
Likes: 2,686
From: Hear
Much but the parts that caused it are gone so I have good reason to hope it is.
Feb 13, 2012 | 09:43 PM
Joined: May 2008
Posts: 363
Likes: 3
From: FLA
Feb 22, 2012 | 05:05 PM
Thread Starter
Joined: May 2010
Posts: 46,288
Likes: 2,686
From: Hear
Most recent oil report, 3700 miles on the motor.
Feb 23, 2012 | 07:14 AM
Joined: May 2009
Posts: 1,365
Likes: 0
From: earth
where do you send your oil? i should do this
Feb 23, 2012 | 07:37 AM
Joined: Jun 2003
Posts: 1,057
Likes: 6
From: san mateo
Oil report looks good, castrol edge german blend? What weight?
Feb 23, 2012 | 12:58 PM
Thread Starter
Joined: May 2010
Posts: 46,288
Likes: 2,686
From: Hear
Yup Blackstone. The two to the right are the first two changes. You can see the break in from the high levels getting lower.
Last edited by e30cabrio; Feb 23, 2012 at 01:00 PM .
Feb 24, 2012 | 10:30 AM
Joined: Feb 2008
Posts: 1,793
Likes: 1
From: Salinas,monterey and seaside..
can you tell me your hp/tp numbers are post of a dyno graph?i have to take a poop and dont feel like looking thru 21 pages....: )
Feb 24, 2012 | 05:16 PM
Thread Starter
Joined: May 2010
Posts: 46,288
Likes: 2,686
From: Hear
One page back, post 386.
Quote:
Originally Posted by
e30cabrio
312/321 closed. 331/347 cutout open.
Feb 24, 2012 | 06:06 PM
Joined: Sep 2006
Posts: 10,097
Likes: 17
From: NC
Feb 25, 2012 | 04:13 AM
Thread Starter
Joined: May 2010
Posts: 46,288
Likes: 2,686
From: Hear
Feb 25, 2012 | 11:31 AM
Joined: Feb 2008
Posts: 1,793
Likes: 1
From: Salinas,monterey and seaside..
impressive now we need some vids to see the power and hear that exhaust
Feb 26, 2012 | 07:13 AM
Joined: Sep 2006
Posts: 10,097
Likes: 17
From: NC
