Shane86

iTrader: (1)

thanks guys

I had to take a brake from the Z today for the wagon, had to finally get the snow tires off and put the summer wheels on.

But i did get the garage tidied up, the Z back on the stands, and the exhaust reinstalled.

I went to top off the diff fluid, as some spilled when i inverted the subframe off the car to get at some bolts. As soon as i popped off the fill plug, it started pouring out. The diff had been overfilled, and the fluid coming out smelled burnt.

I feel like I need to start a rescue. "Shane's house o' battered Zs."

opted to just completely drain it, so I'll need to pick up another qt to be able to fill it.

Just down to ride height, connecting and adjusting the sway bar, and alignment.

risenson

iTrader: (3)

I am sure you all might know but RS Motors had a few opening on their DCTC track event forget the date but they have the info on their FB page for all you track junkies.

Shane86

iTrader: (1)

it's friday night:
http://www.evomn.net/forums/showthre...CTC-2-May-23rd

silverbullet_Z

iTrader: (3)

and registration is closed, waiting list only now

2one8

iTrader: (1)

anyone have experience with the JWT clutch and flywheel combo? Looking at it for the G. They claim its street friendly (almost stock feeling) and good up to something like 570hp, but I'm worried about TQ not HP. Once the turbo is in I should be around 400ft lbs.

silverbullet_Z

iTrader: (3)

Talk to zivman he'll head you in the right direction.

Scuba13

Hey guys, just wanted to introduce myself. "New" Z owner here. The name is Steve (Hence the "scuba" steve name) and I'm just damn glad to finally have this baby. I'm finally getting into the tech side of cars, so if you thought there wasn't any dumb questions, Ii'll be sure to prove you wrong.

If you see a guy with a Handlebar mustache and a TOP GUN hat giving you a wave or a thumbs up, thats me.




And finally, here she is

Zivman

iTrader: (19)

not a fan of the JWT... and if you are going turbo I'd look elsewhere. it is just a modified stock clutch. I mainly don't like its engagement point. I have driven a couple of them and they engage right off the floor. I would think it could be adjusted a bit, but either way, it isn't holding nowhere's near 570 hp....


I had spec clutch that wasn't bad. started slipping at 14 psi (about 500 tq). if it were me buying now, Id do the same clutch I have now again. ATS twin disc carbon with 1350 pressure plate. Sharif @ forged will get you best pricing. Don't get an exedy twin disc. they might be good for other applications, but not so much for the Z.

if you are wanting cheaper, ACT will have something that can hold the power

silverbullet_Z

iTrader: (3)

Welcome what area are you from?

SR71

iTrader: (1)

Scuba13

Nordeast Minneapolis. If you see it parked outside a bar, don't hesitate to stop in, I'll buy the first one



Also. Audio recommendations anyone? I hate the fact I can hardly hear my music when driving with the windows down.

SmoothZ

iTrader: (13)

You have the Bose? It's a good paperweight.

Are those CE28's on your car, Steve?

Zivman

iTrader: (19)

those are replica work emotions.. guessing they are drag brand

SmoothZ

iTrader: (13)

Damn, good eyes. I'm so far behind in the wheel category.

risenson

iTrader: (3)

Short block showed up at RS yesterday. Now its up to my family to get my car out of storage and all the other parts there this weekend.

Made it out of Afghanistan finally. In Romania now with green grass, trees, and fresh air. Few more weeks to go till in MN though.

risenson

iTrader: (3)

A picture of one of our route clearance missions.

Zivman

iTrader: (19)

saw ron post this up on facebook

risenson

iTrader: (3)

yea wish I had more pics had to steal that on from facebook. Soon enough ill have the build thread going up with more pictures. IPP stage 1 short block with rev-up pump, arp main, and low comp pistons.

SmoothZ

iTrader: (13)

Sweet jeezus, epic build coming up!

risenson

iTrader: (3)

Yep basically everything in my profile is what I have to put on. Hoping to have it all done before July 12th, mostly because that is my first day back after my vacation but I also want time to enjoy it before putting it back in storage for the winter.