Forged Performance: Our first GTM TT kit on the VQ35HR..WOW!
#121
Originally Posted by Rogue350z
Any indication of timelines from Carbonetic for production?
Craig, yes the DE and HR use different clutches and flywheels, so unfortunately, neither the clutch nor the flywheel are interchangeable.
#122
New Member
iTrader: (4)
Originally Posted by Sharif@Forged
It's a couple months out...but I can have them hurry it up.
Craig, yes the DE and HR use different clutches and flywheels, so unfortunately, neither the clutch nor the flywheel are interchangeable.
Craig, yes the DE and HR use different clutches and flywheels, so unfortunately, neither the clutch nor the flywheel are interchangeable.
#123
Registered User
iTrader: (7)
Join Date: Feb 2008
Location: Augusta, GA
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by midz350
i don't think i know better than you Sharif!! but i think i heard the clutches are interchangeable but the flywheels are not.
i have a JWT DE clutch in my HR... using the stock flywheel.
JWT said it would work fine, then the mechanic went to install the clutch, and he said it looked like one of the bearings were too small.
Mechanic called JWT, and JWT test fit the DE clutch in the HR and confirmed it would work.
this clutch job was done in april or may of 07(before HR clutch kits were out) i dont remember the exact dates. I have around 1000 miles on this clutch now, with no problems.
#125
Originally Posted by SMB350Z
^^ not saying that i no better than any of the professionals in here, but this was my experience.
#129
!!HR TT!!
iTrader: (10)
Join Date: May 2002
Location: Atlanta
Posts: 876
Likes: 0
Received 0 Likes
on
0 Posts
UPDATE: While I was at SEMA I checked for clutches for the HR. The only option to date is the JWT. I don't think it is strong enough so I am goin to wait for something else to come out.
J
J
#132
Registered User
iTrader: (1)
Join Date: Aug 2005
Location: Brick
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
hey sam do you guys offer any built motor packages for the g37 yet? im loving my built g35 engine but i couldnt imagine one of these bad boys built and stroked since i just picked up a new 37s.
#133
Registered User
Join Date: Nov 2008
Location: mississippi
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
os giken has a dual and triple plate clutch available. all but 1 u.s. dealer said backordered UNTILL but found one great shop who is wiling to go direct to japan and have air freighted over within a week or so. cost (with out shipping) is from 1600-1800. this is the clutch i will be runing in my car. let me know if you would like the contact info for them.
will
will
Last edited by wilsons780; 11-30-2008 at 02:59 PM.
#134
New Member
iTrader: (4)
Thread
Thread Starter
Forum
Replies
Last Post