Sound Performance G35TT race gas dyno (769rwhp)
Thread Starter
Registered User
Joined: Oct 2007
Posts: 1,891
Likes: 1
From: Chicago
Oh, and full boost between 4000-4300rpm (depending on gear).....carry's boost to redline (bout 7500) and power stays up there the whole time.
Edge of pumpgas safety, 19psi it made 655rwhp.
Tom
Edge of pumpgas safety, 19psi it made 655rwhp.
Tom
Last edited by thom000001; Jun 17, 2010 at 06:36 PM.
good work!
so these are some sort of 6057's or the 5857's? crazy how just 5mm smaller wheel completely changes the powerband
we never really tried much with just pump gas. 655 is very solid though.
so 706 on race gas? or with meth?
so these are some sort of 6057's or the 5857's? crazy how just 5mm smaller wheel completely changes the powerband
we never really tried much with just pump gas. 655 is very solid though.
so 706 on race gas? or with meth?
Last edited by str8dum1; Jun 17, 2010 at 06:47 PM.
Thread Starter
Registered User
Joined: Oct 2007
Posts: 1,891
Likes: 1
From: Chicago
They are not the billets. I had the turbo style from before the billets, so they could not be "upgraded" to billets.
So these are the 6031's I believe. 60mm inlet. They are rated at like 10-20hp less than the 5857's (max)....to do billets would have meant buying completely new turbos.
That and Cams are the major changes.
I'll have sheets up tomorrow morn.
Tom
So these are the 6031's I believe. 60mm inlet. They are rated at like 10-20hp less than the 5857's (max)....to do billets would have meant buying completely new turbos.
That and Cams are the major changes.
I'll have sheets up tomorrow morn.
Tom
Registered User
Joined: Feb 2010
Posts: 148
Likes: 1
From: Dekalb, IL
Thread
Thread Starter
Forum
Replies
Last Post
