Unofficial Enkei Wheels Thread
#2762
Wasn't sure i made the right decision going with RPF1's in sbc over PF07's but i opened the box today and said "holy ****" as i first seen them
Such gorgeous wheels, Gonna look sweet.
Such gorgeous wheels, Gonna look sweet.
#2763
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
SBC finish is sweet. Goes with any color car too. My AME/Enkeis are a brighter version of SBC that Enkei uses when they build these wheels. A little too shiny, flashy, IMO but I still love 'em. (Despite my yanking them off the car after only a few weeks because I got my other wheels back and want to try 'em on. )
In for pics!
The following users liked this post:
KingBaby (09-27-2017)
#2770
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Your stock nismo springs are better. I would keep your current setup
#2774
New Member
You will like the Tein S-Tech springs. This setup is almost identical to the street aftermarket Nismo springs (not to be confused with the factory 350z Nismo model).
The Tein S-Tech springs drop your 350z a little more than ½”. This is a conservative drop, but it looks good (and much better than “stupid low”). These springs are slightly towards “soft”, but your z will handle very well with the Tein S-Tech springs.
The Tein S-Tech springs drop your 350z a little more than ½”. This is a conservative drop, but it looks good (and much better than “stupid low”). These springs are slightly towards “soft”, but your z will handle very well with the Tein S-Tech springs.
The following users liked this post:
slow7 (09-30-2017)
#2776
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
The following users liked this post:
slow7 (09-30-2017)
#2778
New Member
Planning on re drilling a set of these RPF1 for my Fiesta since its 4x108
The following users liked this post:
terrasmak (09-21-2017)
#2779
350Z-holic
iTrader: (13)
I've been initiated...
never been a fan of black wheels ... a little (alot) of paint stripper and a little (alot) of elbow grease...
never been a fan of black wheels ... a little (alot) of paint stripper and a little (alot) of elbow grease...
#2780
Enkei RS05RR
10" 12+ 265/35/18 look how close the caliper is to the wheel spokes 2mm.
10.5" 16+ 295/35/18
This is how it looked with 285/35/18 at front - stock camber.
10" 12+ 265/35/18 look how close the caliper is to the wheel spokes 2mm.
10.5" 16+ 295/35/18
This is how it looked with 285/35/18 at front - stock camber.