Unofficial Enkei Wheels Thread
#2801
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
Pretty much any tuner lug will work.... Muteki, Project KICS, Volk, Bloc, etc. As I mentioned to you, I have cheap splines and I have more costly sets of Muteki, Rays. They all work.
I like OEM best. Wish I could use them on a'market wheels.
Then there's these dumbass things....
Swell, juuuuuuuust swell.
Where's the puke bucket at?
I like OEM best. Wish I could use them on a'market wheels.
Then there's these dumbass things....
Swell, juuuuuuuust swell.
Where's the puke bucket at?
#2803
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
Randy, you put THOSE on your car, it IMMEDIATELY drops off my Top 10 list!!! And you don’t want to be off Micster Blackwell’s list do you!? 🤡😆
The following users liked this post:
BigBlue (03-28-2018)
#2805
New Member
iTrader: (7)
If anybody is looking for lugs, I do have an extra set of Muteki SR48 that I would unload pretty cheap. They are open ended so stud length isn't an issue as well. Its these 2 sets:
https://www.rallysportdirect.com/par...SABEgLvr_D_BwE
https://www.ebay.com/i/152692330207?chn=ps&dispItem=1
https://www.rallysportdirect.com/par...SABEgLvr_D_BwE
https://www.ebay.com/i/152692330207?chn=ps&dispItem=1
#2807
New Member
iTrader: (1)
Yea I know the thread pitch. But I saw on other car forums people throwing around 19mm, 21mm and 60mm associated with the length of something like that. Wasn’t sure what that pertained to. When I see lug listings it’s only about the thread pitch of 12x1.25.
Last edited by CK_32; 03-28-2018 at 05:55 PM.
#2808
New Member
iTrader: (1)
side question: what centercaps are ppl running and not the ENKEI ones that are optional with the RPF01s. they super ugly for 100$
Last edited by Bak3rme; 03-28-2018 at 06:24 PM.
#2809
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Common lugs take a 19 or 21 mm socket to remove. You want the ones that take a smaller socket
#2810
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
19mm is pretty much what you’ll find tuner lugs to be.
Another suggestion, much as I don’t like spline lugs, they do work well in tight lug tunnels (like the ones on my Datsun wheels and somewhat for RPFs.) Very narrow with narrow, thin lug key/socket.
#2811
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
^^^ 21mm will REQUIRE thin wall lug socket on these. But not to worry, those are OE lug sizes.
19mm is pretty much what you’ll find tuner lugs to be.
Another suggestion, much as I don’t like spline lugs, they do work well in tight lug tunnels (like the ones on my Datsun wheels and somewhat for RPFs.) Very narrow with narrow, thin lug key/socket.
#2812
New Member
iTrader: (7)
Another alternative (if the budget allows) is getting Rays Formula lug nuts. This is what I currently use and they are amazing. Absolutely no chance of hitting the wheel.
https://www.ecrater.com/p/17332146/v...iABEgL2evD_BwE
#2813
Vendor - Former Vendor
iTrader: (19)
19mm and 21mm sound like socket sizes to remove the lugs... like everyone is saying. The 60mm sounds like an extra long size of lug... almost like those spikes lol. I mentioned before 30-35mm of length should be good. Most McGards we sell are 30mm. Those Mutekis that were mentioned a few posts back are 48mm("SR48"). I hope this answers your question.
Sean
Oakos Automotive
Sean
Oakos Automotive
The following users liked this post:
jhc (03-29-2018)
The following users liked this post:
chewwyy (04-10-2018)
The following users liked this post:
chewwyy (04-10-2018)
#2819
New Member
I understand. Looking at maybe a foot of snow in Minnesota this weekend.
Swift (your wise decision) is the best choice for springs. I went with Tein S-Tech Springs, but I would like slightly more drop and a slightly more firm ride (both of which Swift will provide).
In for pics.
Swift (your wise decision) is the best choice for springs. I went with Tein S-Tech Springs, but I would like slightly more drop and a slightly more firm ride (both of which Swift will provide).
In for pics.
The following users liked this post:
chewwyy (04-14-2018)
The following users liked this post:
chewwyy (04-14-2018)