Help Check Engine Light On!
#26
Registered User
Thread Starter
iTrader: (25)
Join Date: Apr 2006
Location: OC
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rockinbboy
did you try to clear the codes using that scanner tool they provided? It didn't sound like you tried to do that.
#28
Registered User
iTrader: (3)
Join Date: Sep 2003
Location: SoCal
Posts: 1,293
Likes: 0
Received 0 Likes
on
0 Posts
Follow the "resetting the ecu and throtle body" proceedure as located here: http://www.motordyneengineering.com/manual.pdf
That fixed it for me when I got that same code although I did the ecu reset first then the other proceedures.
That fixed it for me when I got that same code although I did the ecu reset first then the other proceedures.
#30
Registered User
iTrader: (9)
Join Date: Oct 2006
Location: Marydel, MD
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
Dude, now unless u touched the little capacitor looking thing inside the tube or damaged it somehow, i can't see how they can't clear that light. That's a very mild code, and can be cleared with any scan tool. And once it has been cleared, will not come back until u tap ur accelerator pedal. Cause its a measuring device for ur injector's pulse width. But it takes the readings from Mass Air Flow sensor (MAF), Throttle Position Sensor (TPS) and a few other sensors. Normally should read 14.7 inches of mercury at WOT, since at that point the air flowing in the manifold and the outside atmospheric pressure is the same. The 14.7 can be different depending on where u live, altitude and temperature.
But i really dont see how they can't erase the code, check it with another shop, they might be using a reader tool.
But i really dont see how they can't erase the code, check it with another shop, they might be using a reader tool.
Thread
Thread Starter
Forum
Replies
Last Post