True Dual Borla Exhaust $630
#101
New Member
Join Date: Sep 2002
Location: San Diego, CA
Posts: 829
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Hope this doesnt happen to our systems. Looks like it happened to a couple of my350z.com members. Borla sent the wrong pipes with the exahust:
https://my350z.com/forum/showthread....threadid=31867
https://my350z.com/forum/showthread....threadid=31867
#102
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally posted by importriders
Hope this doesnt happen to our systems. Looks like it happened to a couple of my350z.com members. Borla sent the wrong pipes with the exahust:
https://my350z.com/forum/showthread....threadid=31867
Hope this doesnt happen to our systems. Looks like it happened to a couple of my350z.com members. Borla sent the wrong pipes with the exahust:
https://my350z.com/forum/showthread....threadid=31867
As for a couple a day installations, I'm not too surprised. An installation takes about an hour and I understand Brent is very busy with Audis and WRXs who also have group buys in the works.
Next time I have a chance to speak with Brent, I'll mention the same side part problem and make sure we don't have to deal with it.
#103
Registered User
Join Date: Jul 2002
Location: San Diego
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally posted by gibbsy1
Only a couple a day? You mean he's not going to shelve his other work to exclusively install our exhausts?
Only a couple a day? You mean he's not going to shelve his other work to exclusively install our exhausts?
#104
Registered User
Join Date: Jul 2002
Location: San Diego
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
You know with:
1. Set of metric sockets
2. Four stands
3. Good floor jack
4. Torque wrench
you can probably do the entire install yourself and save yourself money + get the satisfaction of putting it in. it looks like a bolt on project w/ no special tools required.
- Fran.
1. Set of metric sockets
2. Four stands
3. Good floor jack
4. Torque wrench
you can probably do the entire install yourself and save yourself money + get the satisfaction of putting it in. it looks like a bolt on project w/ no special tools required.
- Fran.
#107
Registered User
iTrader: (5)
Join Date: Aug 2002
Location: Copacabana, Rio de Janeiro BR
Posts: 1,721
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
please remove me from this group buy.
I already ordered mine today and will supposedly have it by next friday.
BTW-I PAID LESS THAN THIS GROUP BUY PRICE!
Interested?
Look Here!
I already ordered mine today and will supposedly have it by next friday.
BTW-I PAID LESS THAN THIS GROUP BUY PRICE!
Interested?
Look Here!
#108
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally posted by all_bark
please remove me from this group buy.
I already ordered mine today and will supposedly have it by next friday.
BTW-I PAID LESS THAN THIS GROUP BUY PRICE!
please remove me from this group buy.
I already ordered mine today and will supposedly have it by next friday.
BTW-I PAID LESS THAN THIS GROUP BUY PRICE!
Glad to hear you saved $5.00.
![Stick Out Tongue](https://my350z.com/forum/images/smilies/tongue.gif)
#109
Registered User
iTrader: (5)
Join Date: Aug 2002
Location: Copacabana, Rio de Janeiro BR
Posts: 1,721
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally posted by hfm
Glad to hear you saved $5.00.
Glad to hear you saved $5.00.
![Stick Out Tongue](https://my350z.com/forum/images/smilies/tongue.gif)
#111
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Compilation of Borla Information
I've been getting a lot of PMs. So, here's the link to the dynos from Borla for exhaust, headers and exhaust + headers:
https://my350z.com/forum/showthread....ght=borla+dyno
I believe it was 24 hp gain for exhaust here. Webcarconnection claims 24.5 WHP and 15.6 TQ gain but is without a chart. Borla conservatively says 20+ hp gain but I suspect it's closer to the 25 we've been seeing and hearing about.
Sound clips are here:
https://my350z.com/forum/showthread....threadid=31977
It sounds good but I really need to hear in person.
As for the group buy, Brent said June 13, 2003 as the closing date. I understand that David wanted to get out 25 and we're over that already. I don't think he expected this kind of demand. But, seeing it's 10 months since release and no one has any significant engine modification yet, short of NO2, I'm not surprised demand is so high.
Regarding weight:
https://my350z.com/forum/showthread....threadid=31885
Borla beat Stillen by 20 lbs, and stock by 6 lbs. Stillen has claimed a 13 hp gain but I have to date never seen a dyno for Stillen. Btw, Stillen has a negative rating with the BBB.
I'm sure more information will come in over the next 30 days but the above should provide you with enough information to make an educated decision.
I've been getting a lot of PMs. So, here's the link to the dynos from Borla for exhaust, headers and exhaust + headers:
https://my350z.com/forum/showthread....ght=borla+dyno
I believe it was 24 hp gain for exhaust here. Webcarconnection claims 24.5 WHP and 15.6 TQ gain but is without a chart. Borla conservatively says 20+ hp gain but I suspect it's closer to the 25 we've been seeing and hearing about.
Sound clips are here:
https://my350z.com/forum/showthread....threadid=31977
It sounds good but I really need to hear in person.
As for the group buy, Brent said June 13, 2003 as the closing date. I understand that David wanted to get out 25 and we're over that already. I don't think he expected this kind of demand. But, seeing it's 10 months since release and no one has any significant engine modification yet, short of NO2, I'm not surprised demand is so high.
Regarding weight:
https://my350z.com/forum/showthread....threadid=31885
Borla beat Stillen by 20 lbs, and stock by 6 lbs. Stillen has claimed a 13 hp gain but I have to date never seen a dyno for Stillen. Btw, Stillen has a negative rating with the BBB.
I'm sure more information will come in over the next 30 days but the above should provide you with enough information to make an educated decision.
#113
Registered User
Join Date: Jan 2003
Location: DELAWARE USA
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally posted by BullishZ
Installed???
Installed???
#114
Registered User
Join Date: Dec 2002
Location: Los Angeles
Posts: 1,235
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Spoke with Brent today at 12:35pm EST, and he told me 2 things.
1) They got the entire batch of them in, and he's going to go pick them up with several trucks today, and the rest probably tomorrow. So he expects to ship them out by early this week.
2) They will not have the "wrong pipe" problem. He's made sure of that.
Now the question is, ARE YOU READY?
1) They got the entire batch of them in, and he's going to go pick them up with several trucks today, and the rest probably tomorrow. So he expects to ship them out by early this week.
2) They will not have the "wrong pipe" problem. He's made sure of that.
Now the question is, ARE YOU READY?
#116
Charter Member #50
iTrader: (3)
Join Date: May 2002
Location: Houston, Texas
Posts: 3,552
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally posted by slay2k
Spoke with Brent today at 12:35pm EST, and he told me 2 things.
1) They got the entire batch of them in, and he's going to go pick them up with several trucks today, and the rest probably tomorrow. So he expects to ship them out by early this week.
2) They will not have the "wrong pipe" problem. He's made sure of that.
Now the question is, ARE YOU READY?
Spoke with Brent today at 12:35pm EST, and he told me 2 things.
1) They got the entire batch of them in, and he's going to go pick them up with several trucks today, and the rest probably tomorrow. So he expects to ship them out by early this week.
2) They will not have the "wrong pipe" problem. He's made sure of that.
Now the question is, ARE YOU READY?
#120
New Member
Join Date: Sep 2002
Location: San Diego, CA
Posts: 829
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally posted by MastaKillaZ
APPOINTMENT AT 8 AM ON SATURDAY MORNING... this I can get out of bed for... no problem...
APPOINTMENT AT 8 AM ON SATURDAY MORNING... this I can get out of bed for... no problem...
![Big Grin](https://my350z.com/forum/images/smilies/biggrin.gif)
![Big Grin](https://my350z.com/forum/images/smilies/biggrin.gif)
![jump](https://my350z.com/forum/images/smilies/icon04.gif)
![Jump 4](https://my350z.com/forum/images/smilies/icon05.gif)
![jump](https://my350z.com/forum/images/smilies/icon04.gif)
![Jump 4](https://my350z.com/forum/images/smilies/icon05.gif)