Fujita Air '07 350z intake dyno results
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: May 2006
Location: San Diego, CA
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Fujita Air '07 350z intake dyno results
My car was prototyped for Fujita Air's intake system for the '07 350z. As I understand it, the units are currently in production and should be ready in a few more weeks.
They were nice enough to do a before and after dyno pull. I have no information about what type of dyno it was, what gear run was done in, etc.
'07 Z dyno
My car reads kind of low on their dyno Aren't other 07 owners dyno'ing in the 260s??
Regardless, you can see the intake appears to give significant gains on the top end. I will let you know when I receive a production unit
They were nice enough to do a before and after dyno pull. I have no information about what type of dyno it was, what gear run was done in, etc.
'07 Z dyno
My car reads kind of low on their dyno Aren't other 07 owners dyno'ing in the 260s??
Regardless, you can see the intake appears to give significant gains on the top end. I will let you know when I receive a production unit
#3
Registered User
Thread Starter
iTrader: (2)
Join Date: May 2006
Location: San Diego, CA
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
I don't have the intake yet. I had previously dropped off my car so they could take measurements and do their fabrication of the intake. I am supposed to receive a production unit from the first batch.
Trending Topics
#10
Guest
Posts: n/a
Originally Posted by DBTRACK
well...... how long do you think it took to pull the baseline, take it off the dyno... install the DUAL intake setup and set the dyno back up and run it again???
#14
Registered User
iTrader: (154)
Join Date: Jun 2003
Location: Hills of Anaheim
Posts: 10,735
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DBTRACK
yeah... that is a possiblity. But if after 12 pulls you get 10whp sign me up.
#15
Registered User
iTrader: (1)
Join Date: May 2007
Location: Oregon
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by THE TECH
If it takes 12 pulls to get 10hp with no tuning, don't you gotta question what's going on?
edit: btw, I can believe those results... the stillen intake gains 3whp but doesn't really change much, leaving the stock piping. The piping has the accordion ridges which create turbulence in the airflow.
Last edited by VitViper; 05-26-2007 at 12:31 AM.
#16
Guest
Posts: n/a
Originally Posted by VitViper
Aside from the obvious funny business... how about... adjustments to the intake for better gains?
edit: btw, I can believe those results... the stillen intake gains 3whp but doesn't really change much, leaving the stock piping. The piping has the accordion ridges which create turbulence in the airflow.
edit: btw, I can believe those results... the stillen intake gains 3whp but doesn't really change much, leaving the stock piping. The piping has the accordion ridges which create turbulence in the airflow.
#17
Registered User
iTrader: (13)
Join Date: Jun 2005
Location: In the wrong lane
Posts: 6,433
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by THE TECH
If it takes 12 pulls to get 10hp with no tuning, don't you gotta question what's going on?
I'd like to see pics of this thing when it comes out