Notices
VQ35HR Mods and Support related to the 2007/08 High Revving VQ

07 HR reflash completed!!

Thread Tools
 
Search this Thread
 
Old Mar 26, 2008 | 10:41 PM
  #301  
Profink's Avatar
Profink
Registered User
iTrader: (15)
 
Joined: May 2007
Posts: 3,430
Likes: 0
From: Studio City, CA
Default

Originally Posted by nareg
i wonder if they can make a flash for nitrous...
They can't do anything on a dry shot except for up the rev limiter, remove the speed limiter, cut the feedback/detune loop, and adjust the throttle response. On a wet shot they can tune it, but you'd have to bring the car in for tuning.
Reply
Old Mar 28, 2008 | 12:37 AM
  #302  
A.H's Avatar
A.H
Registered User
iTrader: (20)
 
Joined: Sep 2007
Posts: 1,699
Likes: 0
From: SoCal 818
Default

Profink Quote:
Originally Posted by A.H
First off I don't have a stock air box to swap them out and i had fast intentions install my stillen intake and they said it was a pain in the ***. But if someone could take me through the process after i get a stock air box i woudl be more than happy to give it a try.

Its not all that difficult to do. I actually just put my old fujitas back on for one more test being done. If you're able to get stock intakes, I can help you out with the install.
Well i finally found a stock air box. Its going to be shipped to my door around the middle of next week so i'll contact you to see when is the best time for you to help me out with the intake swap. Thx for your help
Reply
Old Mar 28, 2008 | 05:51 AM
  #303  
Gooey's Avatar
Gooey
New Member
iTrader: (18)
 
Joined: Dec 2005
Posts: 2,057
Likes: 0
From: MD
Default

so whos the technosquare vendor here? I need to reflash my ecu before the mid-a track day
Reply
Old Mar 28, 2008 | 08:34 AM
  #304  
PM-Performance's Avatar
PM-Performance
Registered User
iTrader: (2)
 
Joined: May 2007
Posts: 631
Likes: 0
From: Land of the Imigrants, PA
Default

Originally Posted by Gooey
so whos the technosquare vendor here? I need to reflash my ecu before the mid-a track day
why go thru a vendor and pay markup?
Go direct!
Reply
Old Mar 28, 2008 | 03:54 PM
  #305  
rkemp1's Avatar
rkemp1
Registered User
iTrader: (2)
 
Joined: Jul 2007
Posts: 1,634
Likes: 0
From: Rockville
Default

Originally Posted by Gooey
so whos the technosquare vendor here? I need to reflash my ecu before the mid-a track day
Just tryna widen that gap huh? lol
Reply
Old Mar 28, 2008 | 03:58 PM
  #306  
ACEMAN's Avatar
ACEMAN
Master
Premier Member
iTrader: (29)
 
Joined: Jun 2002
Posts: 2,774
Likes: 2
From: Hagerstown MD
Default

Originally Posted by rkemp1
Just tryna widen that gap huh? lol
I think your right.... 12.9 is just not good enough for him

Damn, i guess i need to pull a rabbit out of my hat, to hang with him

Todd
Reply
Old Mar 31, 2008 | 09:36 AM
  #307  
zcar_dad's Avatar
zcar_dad
Registered User
 
Joined: Jun 2005
Posts: 115
Likes: 0
From: Kansas City, MO
Default

Got an e-mail on Saturday from Technosquare telling me to fill out the Information Sheet from their webpage and send it, the ECU and $550 plus shipping to them. I have an auto with just K&N filters but have a Borla True Dual available from my old 05 and they stated that aftermarket exhaust will not affect the re-flash/performance. Will be sending it after the 13th of April as will 3 weeks between autocrosses.
Reply
Old Mar 31, 2008 | 10:42 AM
  #308  
nareg's Avatar
nareg
Registered User
iTrader: (1)
 
Joined: Jan 2006
Posts: 391
Likes: 0
From: Houston Tx
Default

Originally Posted by Profink
They can't do anything on a dry shot except for up the rev limiter, remove the speed limiter, cut the feedback/detune loop, and adjust the throttle response. On a wet shot they can tune it, but you'd have to bring the car in for tuning.
that might be kinda hard, im in houston ya know...
Reply
Old Mar 31, 2008 | 11:57 AM
  #309  
ElmafiosoZ's Avatar
ElmafiosoZ
Registered User
 
Joined: Feb 2008
Posts: 30
Likes: 0
From: Vice City
Default

<- Lazy A$$

Jus read parts of the first and last pages, to be clear. there IS a reflash available for the VQ35HR correct?

If so, please direct me to the right place to know what i gotta do.
Reply
Old Mar 31, 2008 | 11:59 AM
  #310  
warmmilk's Avatar
warmmilk
Registered User
iTrader: (5)
 
Joined: Nov 2006
Posts: 2,921
Likes: 1
From: Seattle (area), WA
Default

^ read the last couple of pages
Reply
Old Mar 31, 2008 | 11:59 AM
  #311  
Profink's Avatar
Profink
Registered User
iTrader: (15)
 
Joined: May 2007
Posts: 3,430
Likes: 0
From: Studio City, CA
Default

Originally Posted by A.H
Well i finally found a stock air box. Its going to be shipped to my door around the middle of next week so i'll contact you to see when is the best time for you to help me out with the intake swap. Thx for your help
No problem. I just put my old Fujita's back in for a dyno test and have to swap them out for my OEMs again tonight, so the install will be fresh in my mind.
Reply
Old Mar 31, 2008 | 12:04 PM
  #312  
Profink's Avatar
Profink
Registered User
iTrader: (15)
 
Joined: May 2007
Posts: 3,430
Likes: 0
From: Studio City, CA
Default

Does anyone have an 07 or 08 roadster they can get the ECU number off of for me? The convertibles are the only ones we're not sure of for the reflash and need to see if the ECU codes are the same as the other models. You basically have pull the ECU just to get the code off of the side. Not very hard to do.
Reply
Old Mar 31, 2008 | 12:51 PM
  #313  
ElmafiosoZ's Avatar
ElmafiosoZ
Registered User
 
Joined: Feb 2008
Posts: 30
Likes: 0
From: Vice City
Default

Originally Posted by warmmilk
^ read the last couple of pages
Alrighty, read that some people got a message from technosquareinc.com stating that the flash for the VQ35HR IS available, but when I visit the actual site and look at the application list I don't see the HR on there.

Am I jus getting into this right when they announced it, or am i missing something?
Reply
Old Mar 31, 2008 | 01:39 PM
  #314  
Profink's Avatar
Profink
Registered User
iTrader: (15)
 
Joined: May 2007
Posts: 3,430
Likes: 0
From: Studio City, CA
Default

I will make this simple. Technosquare, Inc. now has a reflash available for the VQ35HR motor found in all 2007 & 2008 350z coupes. The price for the reflash is $550 + shipping. Custom tunes are also available. Contact Technosquare, Inc. directly at 310.787.0847 for more info.
Reply
Old Mar 31, 2008 | 03:01 PM
  #315  
ElmafiosoZ's Avatar
ElmafiosoZ
Registered User
 
Joined: Feb 2008
Posts: 30
Likes: 0
From: Vice City
Default

Originally Posted by Profink
I will make this simple. Technosquare, Inc. now has a reflash available for the VQ35HR motor found in all 2007 & 2008 350z coupes. The price for the reflash is $550 + shipping. Custom tunes are also available. Contact Technosquare, Inc. directly at 310.787.0847 for more info.
perfect, thank you very much
Reply
Old Mar 31, 2008 | 05:16 PM
  #316  
Pokémon's Avatar
Pokémon
Registered User
iTrader: (28)
 
Joined: Oct 2007
Posts: 615
Likes: 0
From: SoCAL :]
Default

I was told custom tuning starting at $150.

I'll have to make an appointment soon!
Reply
Old Apr 1, 2008 | 07:32 AM
  #317  
sibble's Avatar
sibble
New Member
 
Joined: Apr 2007
Posts: 279
Likes: 0
From: NJ
Default

Originally Posted by Profink
As far as a CEL fix, I don't believe the reflash will do anything to fix it.
I have test pipes and I just wanted to check if this was confirmed because I was under the impression that the flash would fix it. I believe I read on their website that a flash would fix it, but I cant connect to their website right now for some reason.

EDIT: Damn it, I could have sworn I read that on their website. Guess I was wrong.

Last edited by sibble; Apr 1, 2008 at 09:53 AM.
Reply
Old Apr 1, 2008 | 08:22 AM
  #318  
SoCal Piliguy's Avatar
SoCal Piliguy
Registered User
 
Joined: Nov 2007
Posts: 27
Likes: 0
From: SoCal
Default

Originally Posted by Profink
No problem. I just put my old Fujita's back in for a dyno test and have to swap them out for my OEMs again tonight, so the install will be fresh in my mind.
Any dyno results with the Fujita's versus the stock intake? I heard from Tadashi you would get better gains with stock intake versus any aftermarket intake.
Reply
Old Apr 1, 2008 | 08:39 AM
  #319  
Profink's Avatar
Profink
Registered User
iTrader: (15)
 
Joined: May 2007
Posts: 3,430
Likes: 0
From: Studio City, CA
Default

Originally Posted by SoCal Piliguy
Any dyno results with the Fujita's versus the stock intake? I heard from Tadashi you would get better gains with stock intake versus any aftermarket intake.
Unfortunately I dont have any that I can post.... But I'll see if I can get some. Basically, aftermarket intakes may give you a higher peak horsepower, but the overall powerband looks worse and when it comes down to it a slightly lower peak horsepower is better if the majority of your powerband is better.
Reply
Old Apr 1, 2008 | 09:18 AM
  #320  
SoCal Piliguy's Avatar
SoCal Piliguy
Registered User
 
Joined: Nov 2007
Posts: 27
Likes: 0
From: SoCal
Default

Originally Posted by Profink
Unfortunately I dont have any that I can post.... But I'll see if I can get some. Basically, aftermarket intakes may give you a higher peak horsepower, but the overall powerband looks worse and when it comes down to it a slightly lower peak horsepower is better if the majority of your powerband is better.
What did you decide to go with, stock or aftermarket?
Reply



All times are GMT -8. The time now is 08:21 PM.