Notices
Wheels & Tires 350Z Rollers and Rubbers

19" Wheel & Tire Discussion Thread

Thread Tools
 
Search this Thread
 
Old 10-08-2013 | 10:19 PM
  #1341  
terrasmak's Avatar
terrasmak
Super Moderator
MY350Z.COM
Premier Member
iTrader: (8)
 
Joined: Jan 2007
Posts: 28,792
Likes: 2,334
From: Sin City
Default

Originally Posted by CleanFairladyZ
^WHAT SIZE!!?!?!?! Just put on 370z nismo wheels (19x9.5 +40 front with 245/35) and now I need front spacers because they rub on the arm really bad. Like straight line driving and rubbing bad.
In your case I would probably just do a 20mm spacer to bring it to the common front offset with a 9.5
Old 10-23-2013 | 10:25 AM
  #1342  
jgc0726's Avatar
jgc0726
Registered User
 
Joined: Oct 2013
Posts: 80
Likes: 1
From: Miami, FL
Default Undecided

Alright guys I've done research on here but couldn't really find what I was looking for or people wouldn't really answer my question. I have 2 setups in mind but not really sure which one to go with

First setup
19x8.5 +15 245/35/19 front
19x10 +15 275/35/19 rear

2nd setup
19x10 +15 255/35/19 front
19x11 +15 285/35/19 rear

Please tell me what u guys think of these setups I'm open to any suggestions let me know which one u guys prefer and which one u guys think would look better.

Also I'm stock suspension right now but will lower after wheel installment and will roll fenders as well
Old 10-23-2013 | 10:47 AM
  #1343  
Bmurray350z's Avatar
Bmurray350z
New Member
iTrader: (34)
 
Joined: May 2011
Posts: 8,069
Likes: 91
From: Burlington, NC
Default

2nd setup for sure
Old 10-23-2013 | 10:51 AM
  #1344  
terrasmak's Avatar
terrasmak
Super Moderator
MY350Z.COM
Premier Member
iTrader: (8)
 
Joined: Jan 2007
Posts: 28,792
Likes: 2,334
From: Sin City
Default

Second
Old 10-23-2013 | 10:57 AM
  #1345  
jgc0726's Avatar
jgc0726
Registered User
 
Joined: Oct 2013
Posts: 80
Likes: 1
From: Miami, FL
Default

Originally Posted by Bmurray350z
2nd setup for sure
Thanks for the reply...will it have a huge stretch or descent stretch? Don't wanna go too stretched
Old 10-23-2013 | 10:58 AM
  #1346  
jgc0726's Avatar
jgc0726
Registered User
 
Joined: Oct 2013
Posts: 80
Likes: 1
From: Miami, FL
Default

Originally Posted by terrasmak
Second
Thanks. Also will I be needing any spacers to make it look more flush or will I be fine with those offsets?
Old 10-23-2013 | 11:17 AM
  #1347  
Waiz's Avatar
Waiz
Premier Member
Premier Member
iTrader: (57)
 
Joined: Feb 2008
Posts: 18,465
Likes: 10
From: SoCal
Default

+3 for second but if you can go with a 9.5 10.5 I believe that is a more ideal setup

Why do you believe you would need to run spacers with +15? That will be more than "flush" enough unless you are running a Big Brake Kit (BBK)
Old 10-23-2013 | 11:18 AM
  #1348  
Bmurray350z's Avatar
Bmurray350z
New Member
iTrader: (34)
 
Joined: May 2011
Posts: 8,069
Likes: 91
From: Burlington, NC
Default

Originally Posted by jgc0726
Thanks for the reply...will it have a huge stretch or descent stretch? Don't wanna go too stretched
depends on the tire brand... i had 275/35 mayruns (cheap chinese tire) on 19x11 and it was perfect. barely any stretch if any at all.

you won't need spacers with the 2nd setup.
Old 10-23-2013 | 11:28 AM
  #1349  
jgc0726's Avatar
jgc0726
Registered User
 
Joined: Oct 2013
Posts: 80
Likes: 1
From: Miami, FL
Default

Originally Posted by Waizzz
+3 for second but if you can go with a 9.5 10.5 I believe that is a more ideal setup

Why do you believe you would need to run spacers with +15? That will be more than "flush" enough unless you are running a Big Brake Kit (BBK)
The thing is the wheels that I bought only make 8.5, 10, or 11 in 19's and I already bought 2 of 19x10 so either I go smaller in front or put the 19x10's in front and go 19x11's in rear but from what u guys have told I would be more than fine with the 2nd setup
Old 10-23-2013 | 11:52 AM
  #1350  
Bmurray350z's Avatar
Bmurray350z
New Member
iTrader: (34)
 
Joined: May 2011
Posts: 8,069
Likes: 91
From: Burlington, NC
Default

yep it'll work great. will just need a roll in the rear.
Old 10-23-2013 | 12:08 PM
  #1351  
jgc0726's Avatar
jgc0726
Registered User
 
Joined: Oct 2013
Posts: 80
Likes: 1
From: Miami, FL
Default

Originally Posted by Bmurray350z
yep it'll work great. will just need a roll in the rear.
Thank you Murray and everybody that took the time to reply
Old 10-23-2013 | 04:38 PM
  #1352  
mr. sparco's Avatar
mr. sparco
New Member
iTrader: (13)
 
Joined: Dec 2005
Posts: 7,086
Likes: 454
From: Sunny Beaches
Default



You will have 5mm less poke than this setup. x10/11 +10 on 245-275/35.
Old 10-24-2013 | 11:55 AM
  #1353  
jgc0726's Avatar
jgc0726
Registered User
 
Joined: Oct 2013
Posts: 80
Likes: 1
From: Miami, FL
Default

Originally Posted by mr. sparco


You will have 5mm less poke than this setup. x10/11 +10 on
245-275/35.
That looks real clean...so you're running 245 and 275? Should I run that setup cuz I see a lot of people running it and haven't seen anybody running the setup I was thinking which is 255 and 285?
Old 10-24-2013 | 01:48 PM
  #1354  
stogey420time's Avatar
stogey420time
Club Moderator
the Hot Spot
iTrader: (1)
 
Joined: Nov 2005
Posts: 3,714
Likes: 78
From: Houston
Default

Originally Posted by jgc0726
haven't seen anybody running the setup I was thinking which is 255 and 285?
255/285 right hur

Old 10-24-2013 | 02:01 PM
  #1355  
Bmurray350z's Avatar
Bmurray350z
New Member
iTrader: (34)
 
Joined: May 2011
Posts: 8,069
Likes: 91
From: Burlington, NC
Default

edit: whoops just realized this is 19" thread not 18" thread so my picture can not be whored

Last edited by Bmurray350z; 10-24-2013 at 02:08 PM.
Old 10-24-2013 | 02:04 PM
  #1356  
jgc0726's Avatar
jgc0726
Registered User
 
Joined: Oct 2013
Posts: 80
Likes: 1
From: Miami, FL
Default

Originally Posted by stogey420time
255/285 right hur

Holy **** that's sexy...are your fenders pulled or just rolled?
Old 10-24-2013 | 02:05 PM
  #1357  
jgc0726's Avatar
jgc0726
Registered User
 
Joined: Oct 2013
Posts: 80
Likes: 1
From: Miami, FL
Default

Originally Posted by Bmurray350z
255/285 here as well

Real nice...what wheels are those?
Old 10-24-2013 | 03:05 PM
  #1358  
jgc0726's Avatar
jgc0726
Registered User
 
Joined: Oct 2013
Posts: 80
Likes: 1
From: Miami, FL
Default

Btw what offset are u guys running?
Old 10-24-2013 | 03:21 PM
  #1359  
taryon's Avatar
taryon
Registered User
 
Joined: Jan 2012
Posts: 1,286
Likes: 1
From: New Zealand
Default

Originally Posted by jgc0726
That looks real clean...so you're running 245 and 275? Should I run that setup cuz I see a lot of people running it and haven't seen anybody running the setup I was thinking which is 255 and 285?

255/285 19x9.5/10.5 +12
Old 10-24-2013 | 03:53 PM
  #1360  
stogey420time's Avatar
stogey420time
Club Moderator
the Hot Spot
iTrader: (1)
 
Joined: Nov 2005
Posts: 3,714
Likes: 78
From: Houston
Default

Originally Posted by jgc0726
Are your fenders pulled or just rolled?
Rolled front and rear. Only need to pull if you're hellaflush with over size shoes with skinny tires.
EDIT: and you are 2"+ low

Last edited by stogey420time; 10-24-2013 at 03:56 PM.


Quick Reply: 19" Wheel & Tire Discussion Thread



All times are GMT -8. The time now is 07:11 PM.