I had 10.5 -10 rear which is a 3mm difference to the 11.5 +6, it's almost a 2" poke past the fenders, not too extreme. Depending on how low you go, you will have to at least roll the fenders flat. I have seen similar setups in the stretched thread.

 

Heres my setup, 255/35/19 and 305/30/19 in the rear. The rear is rolled, but not pulled and it doesn't knock against the rear overfender, however the car is at a pretty decent height and not super low.

Pre-Meet by Travis G. Photography, on Flickr

 

Thanks guys! Really appreciate all your replies. Here is the end result. Rear tyres need to be 35s but I will do that in the future when I drop the Z a bit.

Running Pirelli P-Zero Nero M&S 245/35/19F and 275/30/19R
Ichiba V2 20mm spacers on all four corners with 66.1 mm ID to 72.6 mm OD hubrings

Overall, I am happy with the end result

 

could i run a

19x10 +15 upfront with a 255/35 tire without any suspension work? (fucas etc)

I'm slightly lowered on kw v1 coils up front

 

It should be fine, very close , but will work.

 

I know this has been asked a million times. Im gonna get 19's 9.5f x10.5r.. should I go +22 or +12. I dont plan on lowering for the nxt 3yrs. I dont want hella flush style.. jus dont want to look sunken. Wat size tires do u guys recommend. Sorry my search skills suck ***

 

Depending on tires, +22 will less likely require a roll.

 

Ok ive decided 245/35/19..275/35/19...I guess I should do +22 since I dont want to rub.. will this setup look sunken and will it look retarded not being lowered? Tires will be hankook v12 evos.Thanks guys

 

Will it look good to you not lowered? Maybe. Would I do the same, no.

Won't be sunk, used to be one of the most common wheel/tire setups, just browse through this thread for examples.

 

Even lowered it will be far from sunken. You may need a slight roll out back.

 

Im gonna lower the car eventually when I move to a house with a less steep driveway. So at stock height will +12 rub without rolling fenders?

 

This!
Everything you have been asking has been covered here 100 x over, even with pics.

 

One of the other mods had (probably in a moment of high estrogen) suggested we be more kind and gentler to those who ask infinitely repetitive questions as to not scare off members. lol

 

lol Im crabby, stupid weather. Besides he's been a member since 2012, no more noob shine any more.

 

Sorry for the nub questions guys. I just read the first 35 pages of this thread..And have made my decision. Thanks for the help. Yes I have been a member since 2012 but was never interested in fixing up my z since I lived in apt and parked on the streets. Now I have a house with a gate so its modding time ive been modding cars since 2001 with my old lexus sc300 on club lexus and know how frustrating it is to hear the same "what should I do "questions. thanks for your patience

 

 

Sad to see the only authentic unicorn z I know of up fs.

 

Anyone upfront......have achilles on their wheels . Currently only certains companies made 265/30/19 and im thinking to run achilles atr sport ... But how stretch is it ... Small , true , or large lile contimental and such

 

No one can answer this question without knowing the wheel widths.

 

I'm going to buy a set of rims soon, the buyer said the offset was going to be 15mm front and 20 mm back.....I know the stock are about 30...am i going to have trouble running these rims with these offset?

Front: 19-8.5 15mm offset
Rear: 19-9.5 20 mm offset