Those are fine. They will push out farther than your stock wheels from 3/4"-1.15" depending on what style stock wheels you have. 245/35 and 275/35 tires will keep you around the same height so your speedometer will read the same.

 

I have the 2008 grand touring sotck wheels

front: 18-9 30mm offset
rear: 19-10 30mm offset.


so would i need wheel spacer or any other thing to accomidate the wheels?

 

No spacers needed. The fronts will stick out ~8mm and the rears will stick out ~3mm past your current wheels.

 

Hello Everyone,

I just received my new Verde wheels and would like some suggestion on tire size. The rear wheel are 19*9.5 and the front are 19*8.5. Also would I need fender rolling? I'm planning to drop the car maybe about .5" or 1" lower.








Thanks

 

What are the offsets? I'd probably go with something around a 255/35

 

Im running a 255/40 rear and 245/40 front on G 19s with no fender rolling and it's bitchin'.

 

Being a person that absolutely hate the stretch tire look.
I have the same 19x8.5 and 19x9.5 wheel setup you do.
My front tires are a 255/35 and my rears are 275/35.
That setup looks perfect to me.
I can probably dig up some pictures of them mounted if you are interested

 

Yea it'll definitely help me out. Thanks...tires are freaken expensive.

 

Front offset is 15
rear offset is 20

 

Yes tires are VERY expensive! These are the ones I have on mine
Front: http://www.tirerack.com/tires/tires....WSXL&tab=Sizes
Rear: http://www.tirerack.com/tires/tires....WSXL&tab=Sizes

And if the DWS were offered in a 265 I would have put them on the front rather than 255. Anyway, here are the front and rears.

 

And with those offsets you will not have to roll your fenders

 

Looks the previous owner already did a mild roll in the rear, can't totally tell with the pics.

 

You talking about my car? My rears are slightly rolled because I had a 15mm spacer on top of my Volks so whenever I would get the alignment done it would just slightly rub. So I did a mild roll to fix that rather than ditch the 15mm spacers

 

Not near my car at the moment so I do not have perfect measurements. What is the point at which I will start having suspension clearance issues on the inside of the wheel? Would a 19x11 +23 clear the inner suspension components up front? Can any issues be dialed out with moderate camber and a slight tire stretch?

Like I said, I used the tire calculator, but I'm not home to measure. Thanks.

 

On the front if you run into a clearance problem on the inside, the only thing you can do is add a spacer.

 

Hello I apologize if this is a silly question but would these fit my 2006 touring ? 19X8.5 AXIS HIRO 30 offset Silver in color, 5X114.3 bolt

I know the bolt pattern is correct but I have no idea about the offset

thank you

 

Hello since nobody seems to read the 19' wheel thread , I am posting it here . I found these wheels in ebay str 607 19' +30 width 8.5 . I have been told the wheels would look horrible with a 30 offset is that correct , the seller stated they would fit just like the stock wheels . any advise is appreciated , dint judge me for wanting to buy cheap wheels , I have two kids and college funds and expenses come first . thank you

 

Yes, that will look like poot. 19x9/10 +20~25 is a good place to start and won't require any fender rolling.

 

I think I am going for these :

Style: Forme 1 (Advan RS Style)
Front: 19x9.5 +22 (Clears Factory Brembo Calipers)
Rear: 19x10.5 +22 (Clears Factory Brembo Calipers)
Bore: 73.1
Finish: Hyper Silver
Quantity: 4 Wheels

 

Depending on tire size, alignment specs, and drop, you may have to roll the rear fenders.