When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It'll be closed depending on brand and how low you are
I run a 285 and kinda low and it's very very close to the suspension arm (light marl from actually touching) and basically on my fender up front. And I'm +22 on 10.5
It'll be closed depending on brand and how low you are
I run a 285 and kinda low and it's very very close to the suspension arm (light marl from actually touching) and basically on my fender up front. And I'm +22 on 10.5
My track wheels will be 18x9.5 with a 275
I'm currently running Yoko AD08r 295/30-18 on 18x10.5 +15 and man the tire is super close to the inside arm. (front)
(295/30-18)
I have new wheels on order and it's specs are 18x10.5 +18 and im almost 100% positive that ill have to run a 3mm spacer for my tire to clear my inner arm.
Also,
I previously ran 275/35-18 and i had no issues. (18x10.5 +15 wheels) and i felt i was pretty low.
So I scored for cheap a set of track v.1 18" rims! I was wondering which tire size would be recommended? I've been thinking of 245/40 front and 265/40 rear? I wouldn't be opposed to a "square" set up, I've never tried on the Z but heard it's a good option.
I'm on stock suspensions/springs.
Last edited by Surfer90291; 10-07-2015 at 02:22 PM.
I'm currently running Yoko AD08r 295/30-18 on 18x10.5 +15 and man the tire is super close to the inside arm. (front)
(295/30-18)
I have new wheels on order and it's specs are 18x10.5 +18 and im almost 100% positive that ill have to run a 3mm spacer for my tire to clear my inner arm.
Also,
I previously ran 275/35-18 and i had no issues. (18x10.5 +15 wheels) and i felt i was pretty low.
(275/35-18)
That looks good. I was worried i would be hitting the arm running the 275s.
10-07-2015, 12:26 PM
