18" Wheel & Tire Discussion Thread
#2321
6 inch cawk is my fave!
iTrader: (3)
As far as pictures go they look to be the same just the extra spoke, I would say it's a pretty safe assumptions.
I have 245/40 fronts and 265/40 rears they have a minimum stretch in the front. Im considering 265/35 front and 265/40 rear for my next set.
Car is lowered about an inch and a half, fenders are rolled also... (they rubbed)
#2322
Hello,
I have an 03 Z that came with some 19's and it rides terrible. I actually prefer the look of 18's and proper wheel fitment not to mention how much better of a drive it is with taller sidewalls.
I don't want anything complicated or have to run a spacer etc.. I am considering these wheels
https://esrwheels.com/collections/sr.../products/sr04
18 x 9.5 +22 or +35 (Not sure which offset for fronts to go with)
18 x 10.5 + 22
What I'm unsure is if it might look goofy being sucked in the fender to far or I should be ok?
Was planning on running this tire size
255/18/40 front
275/18/40 rear
I've seen similar setups on here with these specs but with a different style wheel.
I have an 03 Z that came with some 19's and it rides terrible. I actually prefer the look of 18's and proper wheel fitment not to mention how much better of a drive it is with taller sidewalls.
I don't want anything complicated or have to run a spacer etc.. I am considering these wheels
https://esrwheels.com/collections/sr.../products/sr04
18 x 9.5 +22 or +35 (Not sure which offset for fronts to go with)
18 x 10.5 + 22
What I'm unsure is if it might look goofy being sucked in the fender to far or I should be ok?
Was planning on running this tire size
255/18/40 front
275/18/40 rear
I've seen similar setups on here with these specs but with a different style wheel.
#2324
Registered User
Last edited by Kurokiddo; 12-09-2017 at 03:49 PM.
The following users liked this post:
zakmartin (12-13-2017)
#2325
Registered User
#2326
Registered User
Join Date: Dec 2017
Location: Justin, TX
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
So I have recently purchased 527 xxr's in matte bronze and I was planning on buying lowering springs. I was going to purchase the Eibach 1.2 in lowering springs, but I'm not sure about what spacers to get. I'm running 255 in the back and 225 in the front, if anyone could give me a link or any tips on the spacers, I was looking for about 1-1.5 inch spacers. Thanks
#2327
So I have recently purchased 527 xxr's in matte bronze and I was planning on buying lowering springs. I was going to purchase the Eibach 1.2 in lowering springs, but I'm not sure about what spacers to get. I'm running 255 in the back and 225 in the front, if anyone could give me a link or any tips on the spacers, I was looking for about 1-1.5 inch spacers. Thanks
#2328
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
So I have recently purchased 527 xxr's in matte bronze and I was planning on buying lowering springs. I was going to purchase the Eibach 1.2 in lowering springs, but I'm not sure about what spacers to get. I'm running 255 in the back and 225 in the front, if anyone could give me a link or any tips on the spacers, I was looking for about 1-1.5 inch spacers. Thanks
Or read this and do the math: https://my350z.com/forum/wheels-and-...t-novices.html
Last edited by MicVelo; 12-13-2017 at 12:40 PM.
#2330
New Member
iTrader: (1)
Rub is non existent but the exhaust scrape is unreal.
Last edited by CK_32; 02-18-2019 at 01:31 PM.
#2335
New Member
iTrader: (13)
I have 285/35 on 18x10.5 +15 rear wheels that sits pretty flush to the fenders while the fatter tires fill up the wheel well nicely. IMO spacers would make yours look better since your fronts have a slight poke while the rears with the more narrow tires make it look tucked in a bit.
Last edited by mr. sparco; 03-17-2019 at 04:59 PM.
#2338
Registered User
Join Date: Jun 2016
Location: Jacksonville,NC
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts