CopperZ

Ok, so for some reasone, all of those lights stay on for me when i turn the car on even before it start moving. I even pulled the bettery + cable to erase the code. I put the cable back, started the car and they are still on. Checked the Fuse, and its fine. Tires are everything else is factory.
What could it be?

twenzel

iTrader: (27)

A better question is, what were you doing when they came on?

Vertex350

iTrader: (76)

Take it to the dealer if it's still under warranty.

CopperZ

no warranty, I wasnet doing anything just driving. Sometimes they are off but now most of the time they are on.

DavesZ#3

iTrader: (26)

Check the brake fluid level. Check the brake pads.

CopperZ

break fluid level is OK, its between full and low. Pads have never been replaced. 40k miles on the car.

DavesZ#3

iTrader: (26)

Bingo! Winner!

CopperZ

thanks guys!

DavesZ#3

iTrader: (26)

I've seen people who have replaced their stock pads at 12K miles. I did mine at about 18K. I wouldn't be surprised if you need rotors too.

Sponge

iTrader: (5)

My car is getting hawk pads and ss lines tomorrow. First thing you see is the VDC and slip light come on but turn off. As the pads get worse those stay on. You might even see the emergency brake light in the gauge pod come on as you accelerate LOL, I have.

Time for a brake job. Nissan quoted me $500-600 for all four corners. Get the parts and do it yourself if you know how or take the parts to a shop. More performance for the buck.