Notices
Wheels & Tires 350Z Rollers and Rubbers

Volk GT-7, COMPLETELTY curb rashed

Thread Tools
 
Search this Thread
 
Old 02-10-2007 | 10:10 PM
  #1  
igetgreens's Avatar
igetgreens
Thread Starter
Registered User
iTrader: (4)
 
Joined: Jun 2005
Posts: 120
Likes: 0
From: so cal: lc, lb, cerritos
Default Volk GT-7, COMPLETELTY curb rashed

as the title states....i was going through a drive through, i was tired and careless and before i know it i hear the disgusting loud SCRAPE. i checked the lip when i got home and saw that more than half the lip was scraped. i need to get this fixed asap. i've searched and a lot of people say polished lips can also be fixed. any1 know any good repair shops in so cal? preferably near cerritos/long beach area?
Old 02-10-2007 | 10:30 PM
  #2  
Cannysage's Avatar
Cannysage
New Member
iTrader: (29)
 
Joined: Dec 2004
Posts: 7,374
Likes: 1
From: SO_CAL
Default

true wheels in LA.. you're gonna lose your shine though, since they'll have to strip the adonize coat. they fixed mine perfectly but it's dull I may want to chrome it later.
Old 02-11-2007 | 09:57 AM
  #3  
ecorona6's Avatar
ecorona6
Registered User
iTrader: (34)
 
Joined: Apr 2005
Posts: 2,689
Likes: 5
From: Califa's
Default

Originally Posted by Cannysage
true wheels in LA.. you're gonna lose your shine though, since they'll have to strip the adonize coat. they fixed mine perfectly but it's dull I may want to chrome it later.
+1...it will have a dull polished look. Chroming is the way to go.
Old 02-11-2007 | 10:29 AM
  #4  
Volk350Z's Avatar
Volk350Z
Master
Premier Member
iTrader: (65)
 
Joined: Sep 2005
Posts: 2,527
Likes: 0
From: SoCal
Default

yeah try true wheels.. I heard there's a shop around socal that does anodized..
Old 02-11-2007 | 10:29 AM
  #5  
aznmojo's Avatar
aznmojo
Registered User
 
Joined: May 2004
Posts: 2,167
Likes: 2
From: Hong Kong
Default

Here are ur options:

1. take all four wheels and get the lip completely sanded down and buffed, it will all match, everything looks new again... just that u will have to polish it every time u wash the car pretty much.

Theres this place in walnut called THE WHEEL SUPPLY, excellent work, did my wheels for 200 bucks (sand and polish) + mounting new tires.


2. just sand off the curb marks... it will look fine from like 4 ft away... and u can actually just do this urself with wetsand paper, 800 grit and work ur way up to 2000 grit
Old 02-11-2007 | 10:30 AM
  #6  
aznmojo's Avatar
aznmojo
Registered User
 
Joined: May 2004
Posts: 2,167
Likes: 2
From: Hong Kong
Default

by the way, they can put on a new clearcoat for u too, duno how much though... and it doesnt look the same as the volk clearcoat.
Old 02-11-2007 | 11:41 AM
  #7  
Cannysage's Avatar
Cannysage
New Member
iTrader: (29)
 
Joined: Dec 2004
Posts: 7,374
Likes: 1
From: SO_CAL
Default

Originally Posted by Volk350Z
yeah try true wheels.. I heard there's a shop around socal that does anodized..
where would that be? I've never heard of that...
Old 02-11-2007 | 11:46 AM
  #8  
davidf's Avatar
davidf
New Member
iTrader: (18)
 
Joined: Dec 2005
Posts: 5,668
Likes: 0
From: Beaumont, Texas
Default

It's a damn shame Volk won't sell just the barrel assm. for 2 pc. wheels.
Old 02-11-2007 | 11:48 AM
  #9  
xkevon's Avatar
xkevon
Registered User
iTrader: (4)
 
Joined: Aug 2006
Posts: 380
Likes: 0
From: 818 lc
Default

that sucks
Old 02-11-2007 | 11:57 AM
  #10  
igetgreens's Avatar
igetgreens
Thread Starter
Registered User
iTrader: (4)
 
Joined: Jun 2005
Posts: 120
Likes: 0
From: so cal: lc, lb, cerritos
Default

Originally Posted by aznmojo
Here are ur options:

1. take all four wheels and get the lip completely sanded down and buffed, it will all match, everything looks new again... just that u will have to polish it every time u wash the car pretty much.

Theres this place in walnut called THE WHEEL SUPPLY, excellent work, did my wheels for 200 bucks (sand and polish) + mounting new tires.


2. just sand off the curb marks... it will look fine from like 4 ft away... and u can actually just do this urself with wetsand paper, 800 grit and work ur way up to 2000 grit
is it $200 per wheel? also can you give me some more detail about sanding off the curb marks myself? will it look OK?

Last edited by igetgreens; 02-11-2007 at 12:07 PM.
Old 02-11-2007 | 04:14 PM
  #11  
igetgreens's Avatar
igetgreens
Thread Starter
Registered User
iTrader: (4)
 
Joined: Jun 2005
Posts: 120
Likes: 0
From: so cal: lc, lb, cerritos
Default

buuuuuuump
any tips on how to repair it myself is welcome!
Old 02-11-2007 | 04:20 PM
  #12  
Nexx's Avatar
Nexx
New Member
iTrader: (41)
 
Joined: Jun 2005
Posts: 13,654
Likes: 8
From: DFW
Default

just take it to a wheels shop. dont listen to these guys who say you have to have your whole wheel polished. they can just fix the curb. you wont even be able to tell it was there to begin with if the shop is any good. it shouldnt cost more then $125
Old 02-11-2007 | 07:41 PM
  #13  
igetgreens's Avatar
igetgreens
Thread Starter
Registered User
iTrader: (4)
 
Joined: Jun 2005
Posts: 120
Likes: 0
From: so cal: lc, lb, cerritos
Default

Originally Posted by Nexx
just take it to a wheels shop. dont listen to these guys who say you have to have your whole wheel polished. they can just fix the curb. you wont even be able to tell it was there to begin with if the shop is any good. it shouldnt cost more then $125
nice, so even with a polished lip, i'm not too screwed
Old 02-12-2007 | 05:02 AM
  #14  
davidf's Avatar
davidf
New Member
iTrader: (18)
 
Joined: Dec 2005
Posts: 5,668
Likes: 0
From: Beaumont, Texas
Default

The only prob. I see {since I own GT7's} is they are clearcoated, therefore once it's repaired and polished yes it will look good but will mostlikely have more shine to it than the other 3, but really not enough to make a huge difference.
Old 02-12-2007 | 08:38 AM
  #15  
Volk350Z's Avatar
Volk350Z
Master
Premier Member
iTrader: (65)
 
Joined: Sep 2005
Posts: 2,527
Likes: 0
From: SoCal
Default

I heard of a place in fullerton or anaheim that does it.. or just have them clear over the wheels once they finish repolished them.. I had a friend that had the same problem in Florida and got the wheels repolished and have the shop add clear coat paint to the rim.
Old 02-12-2007 | 09:27 AM
  #16  
igetgreens's Avatar
igetgreens
Thread Starter
Registered User
iTrader: (4)
 
Joined: Jun 2005
Posts: 120
Likes: 0
From: so cal: lc, lb, cerritos
Default

Originally Posted by Volk350Z
I heard of a place in fullerton or anaheim that does it.. or just have them clear over the wheels once they finish repolished them.. I had a friend that had the same problem in Florida and got the wheels repolished and have the shop add clear coat paint to the rim.
could you please give me the shop name? thanks
Old 02-15-2007 | 07:56 PM
  #17  
igetgreens's Avatar
igetgreens
Thread Starter
Registered User
iTrader: (4)
 
Joined: Jun 2005
Posts: 120
Likes: 0
From: so cal: lc, lb, cerritos
Default

i went to the wheel supply today and they did a PERFECT job! i can't even see where the rash used to be. only the very tip of the lip was tended to so i still have the clear coat and everything on the rest of the lip. the shine is basically the same and like i said before it looks almost as good as new. o yea.. it was only $50. i reccommend this place to everyone
Old 02-15-2007 | 08:16 PM
  #18  
Cannysage's Avatar
Cannysage
New Member
iTrader: (29)
 
Joined: Dec 2004
Posts: 7,374
Likes: 1
From: SO_CAL
Default

Originally Posted by igetgreens
i went to the wheel supply today and they did a PERFECT job! i can't even see where the rash used to be. only the very tip of the lip was tended to so i still have the clear coat and everything on the rest of the lip. the shine is basically the same and like i said before it looks almost as good as new. o yea.. it was only $50. i reccommend this place to everyone
man, that's too hard to believe! can I check it out in person? I'll be in cerritos this weekend..
Old 02-15-2007 | 09:07 PM
  #19  
igetgreens's Avatar
igetgreens
Thread Starter
Registered User
iTrader: (4)
 
Joined: Jun 2005
Posts: 120
Likes: 0
From: so cal: lc, lb, cerritos
Default

sure!
Old 02-15-2007 | 10:28 PM
  #20  
Cannysage's Avatar
Cannysage
New Member
iTrader: (29)
 
Joined: Dec 2004
Posts: 7,374
Likes: 1
From: SO_CAL
Default

you have pm.


Quick Reply: Volk GT-7, COMPLETELTY curb rashed



All times are GMT -8. The time now is 02:37 AM.