Notices
Wheels & Tires 350Z Rollers and Rubbers

Need input: Horrible steering wheel vibration.

Thread Tools
 
Search this Thread
 
Old Sep 17, 2007 | 06:45 PM
  #1  
meaj82's Avatar
meaj82
Thread Starter
Registered User
iTrader: (31)
 
Joined: Jul 2006
Posts: 676
Likes: 0
From: Houston,Tx
Default Need input: Horrible steering wheel vibration.

Alright, here is the deal. I just got some 19" g35 rays recently. I had them installed last week. At first I had horrible shaking and the car felt very awkward. I went back to get a rebalance with the master tech. All the tires were off.

He fixed it up and the ride feels alot better, but the steering wheel shakes very bad above 70+mph. The rear tires are brand new and the front are used. I'm going back for an alighnment later during the week too.

He did notice some high low spots on the inner part of the front tires, but is it enough to shake that bad at those speeds? I mean it moves my hands like I am holding on to a lawnmower . Anyone care to chime in?
Reply
Old Sep 17, 2007 | 06:50 PM
  #2  
Sean's Avatar
Sean
Registered User
 
Joined: Jan 2006
Posts: 8,719
Likes: 2
From: nj
Default

were the tires high speed balanced?
Reply
Old Sep 17, 2007 | 06:52 PM
  #3  
meaj82's Avatar
meaj82
Thread Starter
Registered User
iTrader: (31)
 
Joined: Jul 2006
Posts: 676
Likes: 0
From: Houston,Tx
Default

yep.
Reply
Old Sep 17, 2007 | 06:53 PM
  #4  
SuperBlack350z's Avatar
SuperBlack350z
Registered User
iTrader: (59)
 
Joined: Feb 2007
Posts: 8,517
Likes: 4
From: Raleigh, North Carolina
Default

were the right rims and tires put on? Did you tell him they are staggered?
Reply
Old Sep 17, 2007 | 06:54 PM
  #5  
meaj82's Avatar
meaj82
Thread Starter
Registered User
iTrader: (31)
 
Joined: Jul 2006
Posts: 676
Likes: 0
From: Houston,Tx
Default

Yeah, they saw that before I mentioned it.
Reply
Old Sep 17, 2007 | 06:56 PM
  #6  
SuperBlack350z's Avatar
SuperBlack350z
Registered User
iTrader: (59)
 
Joined: Feb 2007
Posts: 8,517
Likes: 4
From: Raleigh, North Carolina
Default

well, the two main reason why steering wheel shakes is because of the tires not being balanced and the rims not being hubcentric...and since you have the g35, i'm guessing they are. So the next thing would be seeing if you have bent rims.
Reply
Old Sep 17, 2007 | 07:01 PM
  #7  
Sean's Avatar
Sean
Registered User
 
Joined: Jan 2006
Posts: 8,719
Likes: 2
From: nj
Default

flat spots (from skidding stops) will also do it
Reply
Old Sep 17, 2007 | 07:02 PM
  #8  
meaj82's Avatar
meaj82
Thread Starter
Registered User
iTrader: (31)
 
Joined: Jul 2006
Posts: 676
Likes: 0
From: Houston,Tx
Default

Superblack350:

Forgot to mention he did look for that as well. Anthoer thing, ever since I put on the wheels my car pulls to the right. What about the low high spots on the inner part of the tire? Will that cause anything?

Last edited by meaj82; Sep 17, 2007 at 07:05 PM.
Reply
Old Sep 17, 2007 | 07:07 PM
  #9  
simonfencer's Avatar
simonfencer
Registered User
 
Joined: Jul 2006
Posts: 318
Likes: 0
From: Bothell, WA
Default

If the fronts are used they might be completely shot.

If you have a spare set of front wheels and tires I would put them on to see if it isn't, just by coincidence, something mechanical in the steering or suspension.
Reply
Old Sep 17, 2007 | 07:08 PM
  #10  
SuperBlack350z's Avatar
SuperBlack350z
Registered User
iTrader: (59)
 
Joined: Feb 2007
Posts: 8,517
Likes: 4
From: Raleigh, North Carolina
Default

Originally Posted by meaj82
Superblack350:

Forgot to mention he did look for that as well. Anthoer thing, ever since I put on the wheels my car pulls to the right. What about the low high spots on the inner part of the tire? Will that cause anything?
Yeah, i mean, worn tires due to bad camber will cause steering shake but not bad as you are stating (like a lawnmower).

Also, it would take a pretty extreme flatspot to get bad wheel steering wheel shake. Flat spots kinda make your car feel rough, not necessarily with the steering. I had a good flat spot before because my brakes locked up but it didn't even cause the steering wheel to shake.

Get an alignment. Since you said it pulls the the right.
Reply
Old Sep 17, 2007 | 07:13 PM
  #11  
meaj82's Avatar
meaj82
Thread Starter
Registered User
iTrader: (31)
 
Joined: Jul 2006
Posts: 676
Likes: 0
From: Houston,Tx
Default

Originally Posted by simonfencer
If the fronts are used they might be completely shot.

If you have a spare set of front wheels and tires I would put them on to see if it isn't, just by coincidence, something mechanical in the steering or suspension.

I still have my stock wheels and tires. They never gave me any problems. I might try that out.
Reply
Old Sep 17, 2007 | 07:17 PM
  #12  
meaj82's Avatar
meaj82
Thread Starter
Registered User
iTrader: (31)
 
Joined: Jul 2006
Posts: 676
Likes: 0
From: Houston,Tx
Default

Originally Posted by SuperBlack350
Yeah, i mean, worn tires due to bad camber will cause steering shake but not bad as you are stating (like a lawnmower).

Also, it would take a pretty extreme flatspot to get bad wheel steering wheel shake. Flat spots kinda make your car feel rough, not necessarily with the steering. I had a good flat spot before because my brakes locked up but it didn't even cause the steering wheel to shake.

Get an alignment. Since you said it pulls the the right.

Will flatspots make a car feel like you are driving on a bumpy road even though its smooth?
Reply
Old Sep 17, 2007 | 07:29 PM
  #13  
wayneside's Avatar
wayneside
Registered User
iTrader: (22)
 
Joined: Jan 2004
Posts: 1,340
Likes: 0
From: Texas
Default

the flat spots will do it...or the balance is off. have someone else check the balance. the wheels may have been repaired at one time...if so, one of the wheels may be warped.

sorry to hear!!!
Reply
Old Sep 17, 2007 | 07:38 PM
  #14  
redman333's Avatar
redman333
New Member
iTrader: (8)
 
Joined: Jun 2006
Posts: 1,480
Likes: 1
From: Fayetteville, NC
Default

Originally Posted by meaj82
Will flatspots make a car feel like you are driving on a bumpy road even though its smooth?
Yeah, depending on how bad the flat spot is.
Reply
Old Sep 17, 2007 | 07:40 PM
  #15  
meaj82's Avatar
meaj82
Thread Starter
Registered User
iTrader: (31)
 
Joined: Jul 2006
Posts: 676
Likes: 0
From: Houston,Tx
Default

^^^^^I saw the master tech do the balancing and he was pissed off at what his workers did last week. He even took the time to show me what was wrong and how it is suppose to be. This is driving me nuts!
Reply
Old Sep 18, 2007 | 08:17 AM
  #16  
meaj82's Avatar
meaj82
Thread Starter
Registered User
iTrader: (31)
 
Joined: Jul 2006
Posts: 676
Likes: 0
From: Houston,Tx
Default

bump for more info.
Reply
Old Sep 21, 2007 | 04:12 PM
  #17  
meaj82's Avatar
meaj82
Thread Starter
Registered User
iTrader: (31)
 
Joined: Jul 2006
Posts: 676
Likes: 0
From: Houston,Tx
Default update

Well I had the tires rotated on the front. It seems to have helped a little. The tires do look pretty bad now that the inner part is showing on the outside. He noticed a very small dent that I could not tell it was there. Sigh I hate driving my z like this.
Reply
Old Sep 21, 2007 | 04:21 PM
  #18  
wayneside's Avatar
wayneside
Registered User
iTrader: (22)
 
Joined: Jan 2004
Posts: 1,340
Likes: 0
From: Texas
Default

new tires will probably solve the problem...
Reply
Old Sep 21, 2007 | 04:26 PM
  #19  
Spike100's Avatar
Spike100
New Member
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2006
Posts: 7,337
Likes: 204
From: Edina, Minnesota
Default

^^ I'll bet it's the tires.

--Spike
Reply
Old Sep 22, 2007 | 07:00 AM
  #20  
meaj82's Avatar
meaj82
Thread Starter
Registered User
iTrader: (31)
 
Joined: Jul 2006
Posts: 676
Likes: 0
From: Houston,Tx
Default

I hope so . Thats what I'm planning to do next. Damn!! there goes my mrev2 and spacer

Just to get some re-assurance. The small dent that he could see and I could not even make out. That should not cause anything. Right?

Last edited by meaj82; Sep 22, 2007 at 07:03 AM.
Reply



All times are GMT -8. The time now is 10:55 PM.