What is your opinion on these kinesis supercup wheels on a Z...also would


Diameter: 18in.
Width: 9 .5in (Front), 10.5in (Rear) (Staggered fitment)
Bolt pattern: 5 x 114.3mm (5 lug)
Offset:
(F) +50mm offset (6.75" backspacing),
(R) +44mm offset (7.25" backspacing)

fit a track model (brembos) Thanks!

 

Prob won't clear your brakes but like dave079 said the offsets are all messed up for a Z. You want closer to 0 not further away.

 

+50!?

 

actually to be honest I am completely unfamiliar with wheel sizing and fitments, i assume these wheels will not then then correct? Is there a certain offset I should be looking for? Thanks!

 

I just don't see these working at all with the Z.

 

Yeah wrong size. I am not feeling the styling on a Z either

 

Definitely those offsets are for 996 Porsche 911s. Kinesis are nice wheels but you need way better offsets. For a 10.5" wheels you should look for +18 (aggressive) to +24 (well fit / not as aggressive but still flush to the fenders)

If you want ultra aggressive you can go for an 11" wide rear wheel with +17 which is the most aggressive you can go without running too much negative camber.

 

Closer to 30 if your looking to get the most in tire size on them.

 

They might work if you turn them around.

 

Correct , but if you want to put the larger width tires and not need them streched to clear you need what i said.

 

Bet it would rub , remember 9.5 is his front , and 285 is about the limit for what we can put on the front of our cars.

 

Well if he wants to stay with a 9.5 and 10.5 combo like he's interested in ( if you notice above thats what he was looking at ) i'm just letting him know what he would need. For narrow wheels , guess what , Yes you are right.

 

Might want to clarify what you mean by the "most" in tire size to the OP.

 

Wow, those rims are screaming early 90's.