opinions wanted...hella flush, or ghetto stick out?
#1
Thread Starter
Registered User
iTrader: (13)
Joined: May 2004
Posts: 6,002
Likes: 0
From: Ontario, Canada
opinions wanted...hella flush, or ghetto stick out?
I test fitted some 20mm spacers on my rims...and I wanted to see what people thought of the new stance...Unfortunately, I didn't have time to take much pics...so these will have to do for now...
the offsets of the rims originally is 19x9.5+29..so now i'm effective running 19x9.5+9 which according to the offset calcs, the outer clearence should equal that of an 19x10.5+22. I'm lowered in RS*R springs, which gave it a mild drop of just less than 1 inch (advertised to lower 0.8"). Pics with the spacers are pre-alignment.
so my question to you guys is does it look ok? or sticking out too much?
before:
after:
straight from behind...
the offsets of the rims originally is 19x9.5+29..so now i'm effective running 19x9.5+9 which according to the offset calcs, the outer clearence should equal that of an 19x10.5+22. I'm lowered in RS*R springs, which gave it a mild drop of just less than 1 inch (advertised to lower 0.8"). Pics with the spacers are pre-alignment.
so my question to you guys is does it look ok? or sticking out too much?
before:
after:
straight from behind...
#6
It looks good bro. I have a set of GTF with a +15 in the rear. It looks something similar to your's, but it sticks out just slightly more. With proper alignment and tire size, your car will have a very aggressive look. Leave it just the way it is.
Trending Topics
#10
Thread Starter
Registered User
iTrader: (13)
Joined: May 2004
Posts: 6,002
Likes: 0
From: Ontario, Canada
thanks for the opinions guys. I wasn't sure how they'd look...it does stick out a little bit...and the fact that you could see so much of the tire from the straight rear shot kinda threw me off.
I ran into an issue with torque-ing the front spacers (couldn't put get the torque wrench to click) since I was installing it myself...skinny dude here haha. Gonna take some time and do the front with something to jam the brakes with.
I'll probably be working on it during the week, so expect more pics post spacers later
I might also have the option of running 15mm spacers all around...I'll probably try to test fit the 15mm spacers I have now on the rear to see if that's the route i'll be going with.
One other thing I haven't tested is whether or not the tires will rub...i think that'll be what ultimately makes me decide between 15mm or 20mm rear spacers.
I ran into an issue with torque-ing the front spacers (couldn't put get the torque wrench to click) since I was installing it myself...skinny dude here haha. Gonna take some time and do the front with something to jam the brakes with.
I'll probably be working on it during the week, so expect more pics post spacers later
I might also have the option of running 15mm spacers all around...I'll probably try to test fit the 15mm spacers I have now on the rear to see if that's the route i'll be going with.
One other thing I haven't tested is whether or not the tires will rub...i think that'll be what ultimately makes me decide between 15mm or 20mm rear spacers.
#11
IMHO, you are running slightly too much tire on your setup. The wheel offset is fine, not overly aggressive. It looks like you will have rubbing issues due to the tire size you are running. From my experience, you would have to pull the wheel in about 5-6mm to allow fitment without rubbing with that tire setup.
#20
Thread Starter
Registered User
iTrader: (13)
Joined: May 2004
Posts: 6,002
Likes: 0
From: Ontario, Canada
ok, i think I got worried over nothing...looks really good...finished installing everything tonight...gotta check if the rears rub though...but it looks like it'll clear....
here's some blurry night time teaser shots....full car shots will be coming soon
front:
and look, a plug for authentic vertex. check that fitment yo!!
rear:
flushness ftmfw
here's some blurry night time teaser shots....full car shots will be coming soon
front:
and look, a plug for authentic vertex. check that fitment yo!!
rear:
flushness ftmfw