When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Haven't mounted them yet, stuck in bed from surgery, hope I can get them on soon. I'm currently at +8 with a spacer, not sure it will fit(with minimal camber) so I might change the spacer out.(fenders are rolled BTW, 275/40 fit fine before)
Well...I dunno if this is quite as meaty as you guys like...BUT: SSR Type F Flat Blacks, in Front:18x9 +27 265/40 (haven't decided what tire to get yet, so any ideas? Street/track/autox) and Rear:18x9.5 +22 275/40. We'll see if it's aggressive enough for my taste once it's mounted! Pics to come once I buy tires =p
Spring Boot Cut about 3/4" and Rear camber arms and toe bolt. Don't remember what the spec were set when I got it aligned.
Matte Black Enkie RPF1s
18x9.5 +15 F 255/35/ for now
18x10.5 +15 R 305/35 R888s
These Rub. Needed to roll and pull my fenders. Didn't come out as nice as I'd liked but it got the job done. No more tire rub.
Before Rolling and pulling fenders: Spring Compressed
After: Don't have any with the spring compressed but I may have over flared the fenders just a tad because when the spring is compressed I still have a good 1/4" space. Maybe 315s Now I need Coil Overs because the gap became larger after pulling the fenders.
Last edited by gotagetmyZ; Oct 13, 2010 at 07:14 PM.
Reason: 1212