Hi, My Z peopel!~
will I be able to put the stock tires pressure sensor back on after i install the after market rims, or it will be no longer useful? and if i can, how? is it hard to put it back on, and also , do I need a alignemnt after I install my after market wheels, thanks

 

Whether the sensors will fit your new wheels, depends on the wheels...some you can some you can't. If not you can attach them with a steel band concept that was posted here earlier. Do a search.

No alignment needed with new wheels.

 

what rims are you getting? post pic if you can, that way we can try to determin if the tps will fit.

 

I believe Ive seen him talk about Axis wheels...

 

Axis supermesh 19inch

picture are below

http://www.spyeng.com/spy/supermesh.html

 

Probably need to use steel bands to secure the TPS on the wheels.

 

I used 175lb 60 in. tie wraps with an custom aluminum bracket and some double sided tape. Works perfectly so far. Doi a search to get a general idea of how it works.

Robin

 

i have axis seven mods. and the tps will mount just like stock. it is as simple as unscrewing it of the stock wheels and screwing it on the new ones. just make sure you put the same sensors back in the same corners. such as right front to right front.good luck

 

Thanks for the info,

couple more questions, what is the tps looks like, can you post a picture, b/c i thought the tsp is mounted inside the tires or something, isnt? correct me if i am wrong, and can i ask you what size of tires are you running on your Axis wheel, and what is your offset on you front n back, and which brand of tires did you buy, thanks