another offset question!
another offset question!
gaiz, I'm going to order the following wheels and I wanted to hear your input as far as the OFFSETS. These wheels will be 19x9.5 +0 Front and 19x11 +3 Rears. I'd like to wrap the rears with 305 series. I'm not slammed and I run a "1 finger" gap all around my Z. My question to you is do you think I pull off these offsets without running retarded negative camber?
they will tell u right away 
Trending Topics
You guys think a 305's with a 11" +3 rear is ridiculous? Check out this guy wanting to put 19x11 -17 with a 315 in the back!
https://my350z.com/forum/wheels-and-...thread-17.html
Hey guys, please excuse my noobness! What kind of neg. camber numbers are people running with 19x11 setups in the rear?
I'm coming from the s2000 world where its not uncommon to see -2.5 degrees or more just to get a 9" wide wheel to fit with a 255 tire
I love the deep dish look!! I want to see what the widest possible tire (hopefully a 315/25) I can fit on a 19x11 -17 offset wheel without going to low on the camber. Of course cutting and rolling the fenders is manditory.
Thanks in advance
James
I'm coming from the s2000 world where its not uncommon to see -2.5 degrees or more just to get a 9" wide wheel to fit with a 255 tire
I love the deep dish look!! I want to see what the widest possible tire (hopefully a 315/25) I can fit on a 19x11 -17 offset wheel without going to low on the camber. Of course cutting and rolling the fenders is manditory.
Thanks in advance
James
Are you serious right now? With a 19x11 -17 wheel you will be damn lucky for it to fit with a 255 on it with rolled fenders and -3 degrees or more of negative camber.
Reference this thread: https://my350z.com/forum/wheels-and-...lcome-199.html
If you want a 315 with a 19x11, you will need to be at least in the mid-high teens in offset. While the Z has much more aggressive offsets and allows much wider widths than say, an S2000, it still has limits if you expect if not to look retarded and actually be able to drive it.
Take for instance I have a 20x11 iForged rear wheel with 295/25/20. I could fit a 315x30x20 on my wheel, but my offset is around +25. Your proposed setup isn't even close to working unless you have a widebody or enjoy looking like a low rider, in which case you have no need for a 315.
My .02
Reference this thread: https://my350z.com/forum/wheels-and-...lcome-199.html
If you want a 315 with a 19x11, you will need to be at least in the mid-high teens in offset. While the Z has much more aggressive offsets and allows much wider widths than say, an S2000, it still has limits if you expect if not to look retarded and actually be able to drive it.
Take for instance I have a 20x11 iForged rear wheel with 295/25/20. I could fit a 315x30x20 on my wheel, but my offset is around +25. Your proposed setup isn't even close to working unless you have a widebody or enjoy looking like a low rider, in which case you have no need for a 315.
My .02
Thread
Thread Starter
Forum
Replies
Last Post
