How does this sound
Works cr kai wheels,
18x8.5 +20 front
18x9.5 +12 rear
Ive been looking around and these wheels are solid, affordable, and look pretty darn good, is there anything wrong with the specs i have listed above?
18x8.5 +20 front
18x9.5 +12 rear
Ive been looking around and these wheels are solid, affordable, and look pretty darn good, is there anything wrong with the specs i have listed above?
I would like 10.5 in the rear and 9.5 in the front, any suggestions on some wheels with good build quality, good look and A good price, or am I gonna be saving for a set of advans?
Trending Topics
the sizes are more than fine, and look great on the car

(the above was 8.5 +20 (discontinued), 9.5 +20 (which I eventually switched to +12, but no pics sorry) wearing 245/40, 275/40 S03's (note, if you get a similarly chunky tire, such as a PS2, RE050, RE11, R888 etc, it will look similar. A tire than runs smaller (Toyo T1R, etc) will not look nearly as good)
9.5 front, 10.5 rear = no Advan
SSR, Work Meister, Volks, etc = all significantly more expensive than your proposed setup, so really your call.

(the above was 8.5 +20 (discontinued), 9.5 +20 (which I eventually switched to +12, but no pics sorry) wearing 245/40, 275/40 S03's (note, if you get a similarly chunky tire, such as a PS2, RE050, RE11, R888 etc, it will look similar. A tire than runs smaller (Toyo T1R, etc) will not look nearly as good)
9.5 front, 10.5 rear = no Advan
SSR, Work Meister, Volks, etc = all significantly more expensive than your proposed setup, so really your call.
8.5 +20 is not listed on Work's website and yes, has been discontinued for a long time. They sometimes come up used though. The lowest offset for an 8.5 is +25 which has the same amount of concavity, and still looks great on the car (I used to have those too). Plus, no need to worry about all the extra wear and tear on the rest of the suspension components as the wider, lower offset wheels promote (they look good, I know..we all run them here on our cars, but they are not the be all and end all). Or, if you want em more flush, spacers make it quick and easy
First of all thank you all for the input, ideally I would like the cr kai in 19x10.5 +10ish and 19x9.5 +20, does anyone know of a wheel that can meet these specifications and still maintain a similar look
Thread
Thread Starter
Forum
Replies
Last Post
wanderingstuden
Maintenance & Repair
6
Jan 28, 2016 07:03 PM
Justin100
Intake Exhaust
26
Nov 29, 2015 03:58 PM




