Not getting reception
Not getting reception
My stations are not coming in clearly. I searched the forum and people seem to say its the wiring harness. Mine seems to be done correct.
Also where the antenna goes into the hu its connected to a small black box. I have a long wire coming from it that was never hooked up, whats it for? and could this be the problem?
I tried going to the drive inn theater and had to be moved to the side of another car because I was the only car there that could not get the station. What else could be the problem. Also I think the previous owner had satellite radio hooked up at one point.
Also where the antenna goes into the hu its connected to a small black box. I have a long wire coming from it that was never hooked up, whats it for? and could this be the problem?
I tried going to the drive inn theater and had to be moved to the side of another car because I was the only car there that could not get the station. What else could be the problem. Also I think the previous owner had satellite radio hooked up at one point.
I have pretty bad reception after installing an HU. I've done the wiring harness 2-3 times to make sure it's right and it is. I'm thinking for some reason it's not powering up the aux. antennae amplifier that Z's have. Subscribing for some answers.
I solved the problem... Every station now comes in. Give it a try..
On the harness Unplug both the blue/white stripe wire and the solid blue wire
Plug the solid blue wire into the blue/white and the blue/white into the solid blue.
Just change the two wires and mix match solid blue with blue/white. Simple. Let me know how it works this might help a lot of people.
On the harness Unplug both the blue/white stripe wire and the solid blue wire
Plug the solid blue wire into the blue/white and the blue/white into the solid blue.
Just change the two wires and mix match solid blue with blue/white. Simple. Let me know how it works this might help a lot of people.
I solved the problem... Every station now comes in. Give it a try..
On the harness Unplug both the blue/white stripe wire and the solid blue wire
Plug the solid blue wire into the blue/white and the blue/white into the solid blue.
Just change the two wires and mix match solid blue with blue/white. Simple. Let me know how it works this might help a lot of people.
On the harness Unplug both the blue/white stripe wire and the solid blue wire
Plug the solid blue wire into the blue/white and the blue/white into the solid blue.
Just change the two wires and mix match solid blue with blue/white. Simple. Let me know how it works this might help a lot of people.
Trending Topics
J/k glad you got it working.
Ya that Ipod was getting too me. I know every song before it comes on. I just hope this works for some others as well. I know a lot of people are having problem with reception on there aftermarket hu.
I ripped everything out and did it again. I followed 04silverz35's method and reception was awesome! But then my ipod didn't work... so I put all the wires together and soldered that ish together. It seems to get betting better reception now and ipod works. I hope it doesn't mess up my radio...
ok i tried this, with the extra wiring harness that i had but when i soldered all of the wires i only ended up with 1 solid blue wire and 1 blue and white wire. so im confused as to how to get my local radio stations to work, bc the ipod does become a bit too mononotous bc im too lazy to put new music on it any help would be great
ok i tried this, with the extra wiring harness that i had but when i soldered all of the wires i only ended up with 1 solid blue wire and 1 blue and white wire. so im confused as to how to get my local radio stations to work, bc the ipod does become a bit too mononotous bc im too lazy to put new music on it any help would be great
Thread
Thread Starter
Forum
Replies
Last Post