chazzg

iTrader: (1)

1. Black interior
2. I dont know yet
3. Replace stock Spekers front and rear
4. ?

Marked350Z

1. black interior
2. infinity perfect 10
3. --
4. --

bastard

It might work, but the bose amp would get nowhere near the max potential of the speaker, and would undoubtedly sound horrible due to such gratuitous underpowering. The amp would probably clip like hell above like 1/4th volume and possibly destroy itself and maybe damage the speaker at high volumes. I would not recommend it.

You could maybe get an amp powerful enough for the sub and patch it into the inputs going to the blose amplifier--someone on here did that. I forget who though. This approach may require high level inputs or input converters. I'm not completely sure. Remember though that using high level inputs/converters will introduce a bit of distortion and noise into your sound, but some of it will be attenuated due to crossovers--any high hiss will get cut out by the low pass filter.

Patching into the blose amp's inputs would probably be your only option if you wish to get decent sound out of the JL and keep your stock headunit.

zland

boy am I glad I do not get the Boise system! I have never heard anything good about it except for I do not listen to it so I do not care.

mart32

db track package
1) Carbon Cloth Interior ,black plastic
2) I plan on using a JL Audio 10W3-d6 subwoofer.
3) Other components i will use

-Phoenix gold 2125Ms(sub amp)
-Phoenix gold 430Ms (amp for component set)
-OE Non-Bose Head Unit
-Focal 165K3 Component set
-Phoenix Gold equalizer

4) I live in Canada but i'll be in San Francisco for a business trip from march 3 to march 9.
If the price is good and i'm going for it ,then you could ship to my hotel.

thanks.

Sabre

I am interested as well. Here is my info.

1. Black plastic/carbon cloth
2. 10" (not sure yet) (opinions?!?!)
3. JL XR650CSi components up front & amp
4. nada

ColecatZ

iTrader: (1)

1) Carbon Cloth Interior ,black plastic
2) I plan on using a JL Audio 10" (probably a W3v2)
3) Undetermined on other componets
4) Would a second enclosure, of identical fasion to fit directly across from this one, be possible? and if so....opinions on sound consider boith subs are firing at each other....


other than that, I'd just want the same quality and workmanship seen in Zland's above.

Thanks and I look forward to the followups.

OMEGATLC

1. Color of your 350Z's interior.

Frost Interior

2. Sub drivers you plan on putting in the enclosure.

1 Kenwood XW10DB 10inch sub

3. List if possible, other equipment you will hook up to the system. This is not required but may help him in designing the enclosure to best fit your needs.

Rockford Fosgate 550X amp, Infinity Kappa 60.5 components, Alpine 7995 Head unit.

Thanks

BigZ

Paul,

I would like to get your honest professional input regarding the sound quality and location of the sub/enclosure combination.

I am definetely interested, however, even though the box looks "fantastic" I am also interested in sound quality. Responsive bass at low volumes, and the ability to produce high volume undistorted bass is my primary objective. I know this result is a combination of enclosure and sub. I am not familiar with the sub installed, just JL to an extent.

Thanks in advance!

was wesman

iTrader: (7)

1) Carbon cloth
2)Undecided
3)Depends on sub decision
4)Agree with ColecatZ, what would one on the other side run in addition to this one ?

Hereje0

iTrader: (1)

1. black interior
2. adire brahma 10"
3. --
4. --

JCZ

Paul and Jeff

Great job. Sub enclosure looks great.

1) Carbon Cloth Interior ,black plastic

2) IDQv2 D4 10", IDv3 D4 10" or IDQv3 D4 10" (if is released soon). I may want to order the sub too

3) Other componets
Alpine 7894 HU
PPI 5800
MB Quarts QSD 216

4) I want clean tight bass - no boom

MikesChromeZ

1) carbon cloth

2) (2) ECLIPSE 88100TI TITANIUM

3) INFINITY 6.5" 3 Way Kappa 63.5i
INFINITY 605cs 6.5
FARENHEIT T-7001MHR
Pioneer DVH-P7000 DVD Receiver

Mikey Likes It

1. Color: Black with Burnt Orange leather
2. Sub Drivers: 1 10" JL Audio (Need recommendation)
3. Other equipment: Alpine 7893 HU, Focal seperates and coax. Alpine MRD-500 for sub.
4. Concerns:


Mike

aggie300zx

1. carbon cloth
2. (1) JL10W3-D4
3. see sig below...
4. -

GixxerBB

I'm interested in the enclosure also.

1). Carbon Graphite interior (black i guess)

2). Pheonix Gold Titanium 10"

The enclosure is sealed right? Hope to get a pricing from u soon. Thanks.

BigZ

Count me in as definetely interested:

1) Black Interior/Graphite
2) Image Dynamics IDQ10V.2 D2/D4 (whatever is recommended for the below amp) sub channel is 4 ohm
3) Polk Audio Momo MM6's, Alpine MRV-F450 5 channel Amp

MacGuru

Thanks for the response. I think I'm going to eventually just rip out the Bose and upgrade everything and use the Bose subwoofer as a frisbie with my dog.
Peace. -m

Qbnmissile

Certainly intersted...

Color: Carbon cloth
Driver: IDQ 10" Dual VC 4Ohm
Equipment: MTX 4405 5 channel
Concerns: None

thanks for you're work on this.

Bryan K.
Clovis, CA

rouxeny

Interested
Charcoal leather

unknown amp, unknown system