97 grn ss

iTrader: (2)

I have a set of oem brembos off a track model. how long would it take to install and bleed the system. Don't want to get scored at the dealer!

Simple bolt on right?

thanks
Jeremy

captj3

iTrader: (1)

it should only take 2hrs.Make sure you have the rear bolts for the caliper the stock ones don't fit diffrent thread.

97 grn ss

iTrader: (2)

i probably need those two bolts for the rear. do you have a part number and do dealers usually have them in stock?

ZU L8R

iTrader: (84)

2 hrs is about right, bleeding might take another 1/2 to hour though. Make sure you have the Brembo brake lines or SS lines and the rear bolts previously mentioned.

97 grn ss

iTrader: (2)

thanks really appreciate the help. will post pics of the brembos behind CE28N volks after I get the brakes installed

jeremy

isugoo

iTrader: (6)

i'm going to install brembo tomorrow.
i got off from g35 coupe.
do i need to cut out dust shield or somehting to make it fit?

ZU L8R

iTrader: (84)

Yes, you will need to cut the rear shields

isugoo

iTrader: (6)

Thank you for your info.

sas0

iTrader: (1)

The bolt part number is 08041-2351A and they run around $2.50 each. Performance Nissan has it on their web site here

My bolts got lost in transit and I need a set ASAP. Did you find a dealer that stocked them?

Thanks