View Poll Results: Stoptech: Yes or No
Thumbs Up
58
82.86%
Thumbs Down
12
17.14%
Voters: 70. You may not vote on this poll
Stoptech BBK
Originally Posted by StopTech
There is no need to do any cutting of the brackets to install our kit...it is a direct bolt on.
-Erik-
-Erik-
Originally Posted by __jb
The thread that never dies...
The st45 is a 4 piston caliper used on the rear only. Since the ST45 is a different caliper than the ST40 and uses different pads that the ST40, I suspect you could tell the difference by looking at it.
The st45 is a 4 piston caliper used on the rear only. Since the ST45 is a different caliper than the ST40 and uses different pads that the ST40, I suspect you could tell the difference by looking at it.
you cannot tell by looking at the caliper alone
Originally Posted by AroundMyHorn
you cannot tell by looking at the caliper alone
Originally Posted by lex350
Thats funny because I was thinking of getting yellow calipers. I just needed to here is from someone. I know red would also look good. My budget is $4000-$4300 for everything.
I picked a yellow set of StopTech BBK's with 6 pot up front / 4 pot out back & 14" rotors for my Ultra Yellow Enthusiast!!. Cost $4,500 . Can't wait till they get here!!!
Last edited by z350boy; Jul 26, 2007 at 10:41 AM.
Originally Posted by z350boy
I picked a yellow set of StopTech BBK's with 6 pot up front / 4 pot out back & 14" rotors for my Ultra Yellow Enthusiast!!. Cost $4,500 . Can't wait till they get here!!!
sweet...hope it doesnt take as long as that one dudes. lol
Vendor - Former Vendor
Joined: Aug 2005
Posts: 333
Likes: 1
From: Compton, CA
Originally Posted by z350boy
I picked a yellow set of StopTech BBK's with 6 pot up front / 4 pot out back & 14" rotors for my Ultra Yellow Enthusiast!!. Cost $4,500 . Can't wait till they get here!!!
Originally Posted by Navygolf13
Get AP racing brakes. They are phenomenal, you can get them from VRT, if you want to see what they look like let me know, we can meet up.
Originally Posted by StopTech
There is no need to do any cutting of the brackets to install our kit...it is a direct bolt on.
-Erik-
-Erik-
Just a follow up to my previous post.....I got my Stoptech BBK's the week before the recent Northeast Mountain Run. They are installed and look and stop GREAT!!! pics below:
http://i66.photobucket.com/albums/h2...y/HPIM0026.jpg
How ya like me now!!!!!!
http://i66.photobucket.com/albums/h2...y/HPIM0026.jpg
How ya like me now!!!!!!
Last edited by z350boy; Nov 6, 2007 at 10:14 AM.
Originally Posted by z350boy
Just a follow up to my previous post.....I got my Stoptech BBK's the week before the recent Northeast Mountain Run. They are installed and look and stop GREAT!!! pics below:
http://i66.photobucket.com/albums/h2...y/HPIM0026.jpg
How ya like me now!!!!!!
http://i66.photobucket.com/albums/h2...y/HPIM0026.jpg
How ya like me now!!!!!!
Originally Posted by z350boy
Just a follow up to my previous post.....I got my Stoptech BBK's the week before the recent Northeast Mountain Run. They are installed and look and stop GREAT!!! pics below:
http://i66.photobucket.com/albums/h2...y/HPIM0026.jpg
How ya like me now!!!!!!
http://i66.photobucket.com/albums/h2...y/HPIM0026.jpg
How ya like me now!!!!!!
Originally Posted by GTNPU Z
Here's a perfect example of custom yellow Stoptechs on a custom Z 
. Mazzoo's Z is simply hawtness!!! 
http://www.wide350z.com/Wallpaper.htm
I think red looks good but with yellow, I always start thinking strawberry & bananas for some reason
. Mazzoo's Z is simply hawtness!!! http://www.wide350z.com/Wallpaper.htm
I think red looks good but with yellow, I always start thinking strawberry & bananas for some reason
Last edited by z350boy; Nov 9, 2007 at 01:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Dark Knight
Wheels Tires
7
Nov 11, 2015 08:40 PM
