NEW SPL PRO front compression rod bushings
#1
NEW SPL PRO front compression rod bushings
It's going to be out!! Estimated release - Mar 31 2010 I emailed them asking about it last year and now it's out. http://www.splparts.com/main4/parts/...tmultilink.htm
Sat, Sep 5, 2009 at 4:27 PM
Solid bushing. Will outlast the rest of the car.
Someone please sticky this so people with cars that have the bushing failure can find it easily.
Sat, Sep 5, 2009 at 4:27 PM
Do these bushing replace the bushing in the compression rods on the 2003-2006 RWD G35? The stock compression rods bushing have been know to tear and make noise and Nissan has revised the compression rod bushings but I was wondering if the bushings in the SPL complete set replace the ones on the compression rods also. The problems with stock compression rod bushings can be found here. http://g35driver.com/forums/brakes-s...l-crap-11.html
Thank you.
Alex C
Thank you.
Alex C
Hi Alex!
These bushings replace only the lower arm bushings, they do not replace the compression rod bushings. We may have an offering for the compression rod bushings in a few months...
These bushings replace only the lower arm bushings, they do not replace the compression rod bushings. We may have an offering for the compression rod bushings in a few months...
Someone please sticky this so people with cars that have the bushing failure can find it easily.
Last edited by Andrei; 03-04-2010 at 10:05 AM.
#2
350Z-holic
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
lol..........i was in austin about two weeks ago and actually held it in my hands....
Kual laughed at me when i dropped one of the cone spacers 2 seconds later....lol..
I too am waiting for it.......he told me i had first dibs on the first one! so get in line buddy! im first!
lol..
-J
Kual laughed at me when i dropped one of the cone spacers 2 seconds later....lol..
I too am waiting for it.......he told me i had first dibs on the first one! so get in line buddy! im first!
lol..
-J
#4
Vendor - Former Vendor
iTrader: (10)
Join Date: Nov 2004
Location: Austin TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Would be cool to see Kuah response to his previous post about their findings on replaceing this bush.
https://my350z.com/forum/7485201-post16.html
https://my350z.com/forum/7485201-post16.html
Trending Topics
#12
Vendor - Former Vendor
iTrader: (10)
Join Date: Nov 2004
Location: Austin TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
We are sorry about the delay, the reason for the delay is that we are waiting on a 1" size Endura style bearing (with the slot loaded injection molded liner) that is being manufactured specifically for this application. The Endura style bearings currently only go upto 3/4", and we had to order a large number of these 1" bearings just so the manufacturer would be willing to tool up to make this new bearing. We can use a regular teflon lined 1" bearing but it would be more for a race only application as the liner can "pound out" if dirt gets on the bearing. If there is demand for this race only design right now, I can order up some bearings and have these bushings ready to ship in about 1 week.
#14
Vendor - Former Vendor
iTrader: (10)
Join Date: Nov 2004
Location: Austin TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
I cannot do any introductory specials because that would put us in a pricing conflict with our dealers. However this part is going to be priced VERY competitively with a street price of $157 (MSRP of $185).
#18
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
No chit, i have to align my car next week and wanted them installed before my alignment. Well i guess i'll have to align again later, i still need to get a few more whiteline bushing for the rear end too.