Will an 07 08 motor fit an 03 Z
Trending Topics
#9
New Member
iTrader: (5)
+1!
It will fit (duh), but you will obviously need the 07+ hood unless you use custom mounts and place it way down in the chassis so you F up your oil pan and headers everyday. Other than that, the hardest part will be the electronics piece. This is my worst area, but definitely start with the proper 07+ ECU, but there will probably be a lot of headaches as there are extra pieces of electronics on the newer Z's that may cause conflicts if you aren't using an aftermarket ECU.
It will fit (duh), but you will obviously need the 07+ hood unless you use custom mounts and place it way down in the chassis so you F up your oil pan and headers everyday. Other than that, the hardest part will be the electronics piece. This is my worst area, but definitely start with the proper 07+ ECU, but there will probably be a lot of headaches as there are extra pieces of electronics on the newer Z's that may cause conflicts if you aren't using an aftermarket ECU.
#11
New Member
iTrader: (10)
I like where you are going with this one....however I would wait for the piggy back ECU bugs to be worked out first. Do you know of any boosted HR's? There are only a handful and I am not one to be the "test dummy" with my ride. I see swaps being a big thing for twin turbo cars...not so much for the SC guys...
Why go through all that trouble when a built block 3.5-3.8 block is cheaper at this point?
Why go through all that trouble when a built block 3.5-3.8 block is cheaper at this point?
Thread
Thread Starter
Forum
Replies
Last Post