Hey Guys, anyone knows if the G35 06 c differential (lsd) is equal to 06 differential(no lsd) 350z?, because when i put on my Z, both rims had a play, so i dont know if the axles of the G35 are bigger than those ,or the differential fron the Z is shorter?.............help please!

 

Nobody???

 

Guys im really need your help, thanks

 

bump

 

bump

 

bump

 

bump!

 

Are you talking about a full pumpkin or just a diff change? I believe the axle stubbs are different between the LSD and non LSD. But, if you are swapping the entire pumpkin, you should have no problem.

 

thanks god!

Is the full pumpkin with axles came from g35 ........

there must be something different......., thanks

 

The G pumpkin will bolt right in to your Z. Use the stub axles that are already in the G pumkin and use the stock axles (half shafts) that are already on your Z. Remember that the inner CV joints are telescopic. They move in and out making the axle longer and shorter with suspension movement. You may have to extend the inner joints a little to make them mate up. I have a G pumpkin in my Z.

 

ok im going to try with the stock axles from my Z, and lets see waht happen, thanks for your help

 

I have a z pumpkin in my g and no problems.

 

wuts up!, today i put the stock axles from Z with the G pumpkin, and still the problem, so i had to do, was put a washer on each end of the axles, and the problem gone...........

 

bump