3.9 Final Drive Ratio is here !!!
#101
All you have to do is ask. You can do one of two things.
Have someone take apart your rear end and take that stuff out....or ship it back to us and we can do it. You would just have to pay a small fee for the labor + shipping back to you ad you can keep the parts.
When we rebuild the housings they get all new internal parts. We can work with you.........not against!
Cheers
BJ@350EVO.com
Have someone take apart your rear end and take that stuff out....or ship it back to us and we can do it. You would just have to pay a small fee for the labor + shipping back to you ad you can keep the parts.
When we rebuild the housings they get all new internal parts. We can work with you.........not against!
Cheers
BJ@350EVO.com
#108
Sentry, I didn't notice your ridiculous amount of mods! Pretty impressive stuff. The tilton setup with the final drive had to be pretty significant themselves, let alone all the breathing mods. Did you ever measuse 1/4 mile or 0-60 times?
#109
Originally posted by phile
Sentry, I didn't notice your ridiculous amount of mods! Pretty impressive stuff. The tilton setup with the final drive had to be pretty significant themselves, let alone all the breathing mods. Did you ever measuse 1/4 mile or 0-60 times?
Sentry, I didn't notice your ridiculous amount of mods! Pretty impressive stuff. The tilton setup with the final drive had to be pretty significant themselves, let alone all the breathing mods. Did you ever measuse 1/4 mile or 0-60 times?
I'm still getting my ECU/tuning in check so I haven't done any runs, but my estimate from guessing would be low 13's for quarter mile and around 5-5.3 sec for 0-60.
Traction is my biggest issue right now - still have stock tires....which sucks, but I'll upgrade that sometime soon. I get to about 5000rpms in 1st and if i'm flooring it, the tach just jumps to redline cause the tires just lose their grip around there. So it's kinda hard to really say at this point. It feels and sounds a lot faster though than stock, that's for sure. I drove a stock Z and it felt slow compared to my car. It won't compete with a FI Z though
#111
it won't actually add any horsepower
it takes off top end speed and gives you 10% more accelleration. It spins your tires 10% faster/harder
you'll be shifting more
you'll burn more gas
It's noticable
the part by itself if $850, you'll need like $70 more for misc parts, then 600 for install
it takes off top end speed and gives you 10% more accelleration. It spins your tires 10% faster/harder
you'll be shifting more
you'll burn more gas
It's noticable
the part by itself if $850, you'll need like $70 more for misc parts, then 600 for install
#113
pinion nuts and sleeves and whatnot to install it
this has all been coverec in depth before a few times - try a search
in fact, it's probably covered earlier in this thread
this has all been coverec in depth before a few times - try a search
in fact, it's probably covered earlier in this thread
Last edited by sentry65; 01-26-2005 at 03:22 PM.
#117
Originally posted by Billyz 212
That clutch has got to be crazy. let me know how it feels with the 350evo final drive
That clutch has got to be crazy. let me know how it feels with the 350evo final drive
You can feel the difference in the gearing. It depends on what mods you have now and where you want your car to be as far as modding. I'd recomend getting the cusco RS LSD while you have your diff ripped apart. It'll help you put your new power to the ground. It'll save you like $400 install fee later down the road. I know a LSD isn't that exciting compared to power mods, but you'll be glad you have it when you drive your car with it. It'll help keep you from fishtailing
You can feel more ooomph when cruising on the highway with the gears. 5th and 6th gear have some ***** now. driving in 4th at WOT is of course more fun
Last edited by sentry65; 01-26-2005 at 04:19 PM.
#118
hmm wil think about it. Im basically pileing up all the parts now and will start installing in the spring. Plenum, hi flo cats, headers, but looking at this 3.9 im wondering if I should just cancel that stuff and get this. after all acceleration is what i am going for. from the sounds of it this will probably do more for that than any of the mods i listed even if combined
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
10-29-2020 08:44 PM